|
112
<br />0'-0" Existg Fin Flr
<br />13'-5" A.F.F.
<br />(existg. 2nd Level)
<br />04
<br />A3.1
<br />jmwells design
<br />713 washington street
<br />kerrville, texas 78028
<br />830.890.8808
<br />jmwellsdesign@gmail.com/
<br />jackmwells@outlook.com
<br />C O P Y R I G H T 2 0 1 7
<br />B I N D I N G . . .D:\Jack\My Documents\Drawings\LEER CONSTRUCTION\JANOON Banquet Remodel\Janoon Tenant Improvement.dwg--
<br />A3.1
<br />18.106
<br />Canopy Plan/
<br /> Elevation
<br />Canopy Plan at "Yosemite Street"
<br />1/4" = 1'-0"01
<br />5401 N. Hickman Rd., Denair, Ca. 95316
<br />(209) 485-8620
<br />Yosemite Street Elevation
<br />3/16" = 1'-0"02 Tenant Improvement/ Design Build112 East Yosemite AvenueManteca, CaliforniaPhase 2Janoon Banquet and Event Hall5401 N. Hickman Rd., Denair, Ca. 95316
<br />(209) 485-8620
<br />SECTION (10 73 00) (10 70 13.53)
<br />Glazed Canopies
<br />PART 1 – GENERAL
<br />1.1 SUMMARY
<br />A Section Includes:
<br />1 Fixed exterior glazed/metal canopies
<br />B Related Sections:
<br />1 Division 01: Administrative, procedural, and temporary work requirements.
<br />2 (Section 10 70 13.53 Exterior Daylighting Devices)
<br />1.2 REFERENCES
<br />A Aluminum Association (AA) DAF 45 - Designation System for Aluminum Finishes.
<br />B American Architectural Manufacturers Association (AAMA)
<br />1 2603 - Voluntary Specification, Performance Requirements and Test Procedures for
<br />Pigmented
<br />Organic Coatings on Architectural Extrusions and Panels.
<br />2 2605 - Voluntary Specification, Performance Requirements and Test Procedures for
<br />Superior Performing Organic Coatings on Architectural Extrusions and Panels.
<br />C American Society of Civil Engineers (ASCE) 7 - Minimum Design Loads for Buildings and Other
<br />Structures.
<br />D ASTM International (ASTM)
<br />1 B221 - Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods,
<br />Wire, Profiles, and Tubes.
<br />2 B429 - Standard Specification for Aluminum-Alloy Extruded Pipe and Tube.
<br />1.3 SYSTEM DESCRIPTION
<br />A Design Requirements: Design Glazed Canopy System to withstand:
<br />1 Standards for wind pressure, snow load, and drifting snow load in accordance with
<br />current adopted form of the Uniform Construction code or accepted requirements of local
<br />municipality.
<br />1.4 SUBMITTALS
<br />A Submittals for Review:
<br />1 SUBMITTALS
<br />a Submit in accordance with Section [01 33 00] [01330] - Submittal Procedures:
<br />1 Product data for all proposed components, materials, products, and
<br />accessories.
<br />a For each type glass, provide maximum allowable stress in both
<br />horizontal and vertical directions.
<br />b Provide photographs or drawings for fittings and hardware.
<br />2 Shop drawings:
<br />a Plans, elevations, and sections illustrating shape, configuration, and
<br />dimensions. For complex canopies provide perspectives, renderings,
<br />or models.
<br />b Illustrate method of assembly, installation, and glazing.
<br />c Provide details for support framing, reinforcement, connections,
<br />joints, anchors, and other fabrication and installation conditions.
<br />d Indicate required tolerances and coordination with adjacent elements
<br />and work of other trades.
<br />3 Calculations: Show compliance with performance criteria and applicable loads
<br />with stamp of Licensed Professional Engineer registered in the State.
<br />4 Samples:
<br />a 3 x 3 inch coating samples [showing available colors.] [in specified color.]
<br />b 12 inch sq. glass or G7 sample (or other deck selection) samples showing profile
<br />and finish.
<br />c outrigger, fascia, and infill samples.
<br />B (LEED Project Submittals)
<br />1 Product Data for Credit MR 4: documentation indicating percentages by weight of
<br />post consumer and pre consumer recycled content. Include statement indicating cost for
<br />each product having recycled content.
<br />2 Product Data for Credit MR 5: Indicate location of product manufacturer, distance from
<br />manufacturer to project site, and mill test report for origination of materials.
<br />1.5 QUALITY ASSURANCE
<br />A To ensure that completed glass canopy is structurally sound, weather tight, functional,
<br />durable, and safe; specify that design, engineering, fabrication, and supply of all components,
<br />materials, and products be the sole responsibility of an experienced single entity such as MASA
<br />Architectural Canopies, Inc. It is critical that unique glass structures be both designed and
<br />fabricated by a single, knowledgeable entity assuming complete responsibility. Piece-meal
<br />assemblies of products from numerous manufacturers and fabricators without a comprehensive
<br />design and engineered solution is not a method for achieving a functional, safe, glass structure.
<br />B Single source responsibility: Design, structural engineering, and custom fabrication
<br />for glass canopy and supply of all components, materials, and products shall be sole
<br />responsibility of single manufacturer. Provision of products from numerous sources
<br />for site assembly without complete single source design and supply responsibility is
<br />not acceptable.
<br />C Mockup:
<br />1 (Upon written request only) Provide mockup of sunshade system including framing,
<br />decking, louvers, and attachments at location selected by architect.
<br />PART 2 – PRODUCTS
<br />2.1 MANUFACTURER (SUGGESTED)
<br />A Contract Documents are based on:
<br />Vision Series Canopy as manufactured by:
<br />MASA Architectural Canopies
<br />Corporate Mailing
<br />PO BOX 32
<br />Saint Clair, PA 17970
<br />800-761-7446
<br />www.architecturalcanopies.com.
<br />B Acceptable alternates:
<br />Other manufacturers may bid only after written approval of the architect, obtained 10
<br />days prior to bid opening and issued by addendum. Interested manufacturers must
<br />furnish full details of proposed product, engineering calculations on all sections involved,
<br />physical samples of all shapes and finishes, a list of installations similar in size and
<br />design, and must have a minimum of five years experience in manufacturing and
<br />installing extruded aluminum louver systems
<br />2.2 MATERIALS
<br />A Aluminum Extrusions:
<br />1 ASTM B221& ASTM B429 6061-T6/T5 alloy and temper.
<br />B Hardware:
<br />1 All fasteners shall be stainless steel or zinc coated for corrosion resistance.
<br />2.3 COMPONENTS
<br />A Mounting- Hanger-Rod Suspended
<br />B Frame-Fascia- #CC1
<br />C Outriggers – #CTB1
<br />D Decking/Glazing- #GC-SC
<br />E Rear Gutter
<br />2.4 ACCESSORIES
<br />A Anchors and Fasteners: Stainless steel or zinc coated for corrosion resistant
<br />B Lighting :
<br />2.5 FABRICATION
<br />A Fabricate Vision Series Canopy system in accordance with approved Shop Drawings.
<br />B Canopy sections to be pre-fabricated off site and transported in the largest available section
<br />sizes permitted by law.
<br />2.6 FINISHES (select appropriate finish) (powder coat finish)
<br />A Aluminum:
<br />A1 Pre- Treatment: Pre-treat to ASTM D1730 type B, Method 5 using a multi stage
<br />chromate
<br /> process or an approved chrome- free pretreatment process approved by
<br /> powder coat manufacturer for optimized weather resistance.
<br />1 Type AAMA 2603 Thermosetting Polyester Resin-based Powder
<br />2 Source: Tiger Drylac powder coating or equivalent.
<br />3 Color: (color) to be selected by architect from MASA’s standard 5 colors
<br />
<br />Aluminum:
<br />1 AAMA 2605, Fluoropolymer coating containing minimum 70% PVDF resins
<br />2 Source: Duranar by PPG Industries, Inc.
<br />3 Color: (color) to be selected by architect from MASA’s full color range
<br />PART 3 – EXECUTION
<br />3.1 FIELD DIMENSIONS
<br />A Field verify dimensions of supporting structure at site of installation prior to fabrication.
<br />3.2 INSTALLATION
<br />A Install in accordance with manufacturer's instructions and approved Shop Drawings.
<br />B Install components plumb and level, in proper plane, free from warp and twist.
<br />C Anchor system to building components; provide adequate clearance for movement caused by
<br />thermal expansion and contraction and wind loads.
<br />3.3 ADJUSTING
<br />A Touch up minor scratches and abrasions on finished surfaces to match original finish.
<br />END
<br />Glazed Canopy Notes
<br />Side Elevation
<br />3/16" = 1'-0"03
<br />Section at Canopy
<br />1" = 1'-0"04
<br />Added Sheet...
|