SU0014565 (2) - Laserfiche WebLink

Home Browse Search

CHAIN LINK FENCING Ali,TA — CA IG. DIIS P. O. COX X99 ✓ TRACY. CALIF. 95376 (1) Workmanship: All work will be completed in accordance with the best trade practices of industrial fence installations. Securely set all posts in alignment at the proper depth and height, and rigid bracing where needed, install fabric under tension and securely tie to posts and rails. (2) Material: A. Line posts will be on one and seven -eighths (1 7/8") in- ches in outside diameter at two point seventy-two hundreds (2.72) pounds per foot, eight foot eight inches (81811) long and set on ten (10) foot centers. Holes must be eight inches,.(8'1)_ir1_dia- meter and thirty-six inches (36") in depth. b. Terminal posts will be two and seventy-eight inches (2.78") in outside diameter at five point seventy-nine (5.79) hundred pounds per foot and ten feet (101) long. Holes must be twelve inches (1211) in diameter and thirty-six inches (36") deep. c. Fabric will be nine (9) gauge, six foot (61) in height, gal- vanized after weaving. Leave one and one-half inches (1�1) be- tween ground and bottom barbs. Install fabric on security side (subdivision side)of posts. d. Fittings must all be made of pressed steel. e. All horizontal braces will be one and five eighths inches (1 5/811) outside diameter pipe at two point twenty-seven (2.27) hundred pounds per foot. f. All diagonal trusses will be three -eighth inches (3/8") in diameter. g. Tension bands will be one-eighth by one inch (1/8" x 1") thickness set on a maximum of fifteen inch (1511) centers. h. Brace bands will be ane�eighth by one inch (1/81, x 1") thick- ness. i. Tie wire will be aluminum, nine (9) gauge set on. -a maximum of fifteen inch (1511) center. j. Hog rings will be nine (9) gauge steel set on twenty-four inch (2411) centers. k. Top and bottom tension wire will be of seven (7) gauge coil spring. 1. Three (3) -top stands of wire will be zinc coated twelve and one-half (12}) gauge barbless wire.