Laserfiche WebLink
VEEDER-ROOT <br />Communication Compartment Modules (1'srttt 4 per console unless otherwise noted) <br />Memory Expansion Modules <br />Description <br />Part # <br />Description <br />Part # <br />Memory Expansion Module for <br />RS -232 Interface Module (Max 3/console) <br />329362-001 <br />ECPU2 board, 1 MEG (req'd for <br />version 27 or higher on > 8 tanks or <br />333760-201 <br />BIR w/ manifold tanks) <br />Memory Expansion Module for <br />RS -232 Satellite Module <br />329362-003 <br />ECPU2 board, 2 MEG (req'd for ISD <br />333760-203 <br />or Maintenance Tracker) <br />TLS-350PLUS <br />RS -232 Serial Satellite Module <br />329362.004 <br />System Compatibilities Guide <br />Commry�� <br />RS -232 Single Port Module, DB25, w/ Maintenance Tracker ID Resistor <br />329362-005Memo <br />- <br />TLS -350R <br />Dual Port RS-232/RS485 Module Interface (only used in Comm. Slots 3 &4) <br />330586-001 <br />Modules (Continued) <br />Feature/Console <br />PC-35OR <br />TLS-350PLUS <br />Dual Port Remote Display Module Satellite RS -232 <br />330586-011 <br />PC,350PLUS <br />Dual Port Remote Display Module Satellite RS -485 (Amoco) <br />330586-015 <br />CONSOLE DESIGN <br />Dual Port RS -485 Module/Serial Satellite (Shelo <br />330586-016 <br />Modular/Expandable Features <br />• <br />Fixed Features <br />Dual Port RS-232/RS-485 Module DB9 with Maintenance Tracker ID <br />330586-017 <br />Integral Printer <br />Optional <br />Resistor (only used in Comm Slots 3 &4) <br />-- <br />INVENTORY CONTROL <br />SiteFax' Module 300/1200/2400 -Baud Fax/Modem Interface (Max 3/ <br />330149-002 <br />Business Inventory Reconciliation <br />• <br />console, phone cable included) <br />Variance Analysis <br />• <br />Ethernet TCPAP Communlcations Module <br />330020-425 <br />Fuel Manager <br />Optional <br />Specifications <br />Complete Inventory Reports <br />• <br />Programmable Auto Report Times <br />• <br />Operating Temperature <br />+32 to +1187 (0 to +45°C) <br />Inventory Increase Report <br />• <br />Storage Temperature <br />-40 to +162°F (40 to +74'C) <br />IN -TANK LEAK TEST <br />Installation Location <br />NEMA 4 or indoors <br />0.1 GPM Tank Tightness Testing <br />• <br />0.2 GPH Tank Tightness Testing <br />• <br />Relative Humidity <br />0-90% (non -condensing) <br />Continuous Statistical Leak <br />External Dimensions <br />-__ <br />19.75'x 11.25° x 7.1875" (50.165cm x 28,575cm x 18.26cm) <br />Detection <br />Optional <br />- <br />Selectable Test Rates I <br />• <br />Construction <br />16GA (0.060 in/0.1524 cm) powder coated steel <br />Programmable Automatic Test <br />•_ <br />Schedules <br />PASS, FAIL, or INVALID Indicators <br />• <br />Console Power Wiring <br />AC Power Wiring - Wires carrying 120 or 240 VAC from power panel to the <br />LINE LEAK DETECTION <br />Requirements <br />console should be #14 AWG (or larger) wire for line, neutral & chassis ground (3); <br />- <br />and 4 sq. mm, rated for at least 90C for barrier ground. <br />Integral Line Leak Detector <br />Optional <br />Programmable Line Test Features I <br />Optional <br />INTERSTiTIAL/SUMP LEAK SENSING <br />Tank Annulus <br />• <br />1. Wire Type - Shielded cable required regardless of conduit material or <br />Sump <br />• <br />application. it must be rated less than 100 picofared per ft manufactured with a <br />Dispenser Pan <br />• <br />suitable material such as Carol C2534 or Belden 88760, 8760, or 8770. <br />_ <br />Meg Sump <br />• <br />2. Wire Length - Maximum 1,000ft (304.8m) to meet Intrinsic safety <br />Sensor Location Identifiers <br />• <br />requirements. Improper system operation could result for runs over <br />Probe & Sensor to Console <br />1,000ft (304.8m). <br />VAPOR WELL MONITORING <br />Wiring Requirements <br />3. Wire Gauges - Color coded - shielded cable used in all installations. Wires <br />Hydrocarbon Vapor Detection <br />• <br />should be #14 418 AWG stranded copper wire and installed as Class 2 <br />High Water Level Alarm <br />• <br />circuits. As an alternate method when approved by the local authority having <br />- <br />jurisdiction, 422 AWG wire such as 88761 may be suitable with the following <br />GROUNDWATER MONITORING <br />requirements: wire run Is less than 750ft (228.6m); Capacitance does not <br />Hydrocarbon Liquid Detection <br />• <br />exceed 100 pF/ft; Inductance does not exceed 0.2 uH/ft. <br />Low Water Alarm <br />• <br />SECONDARY CONTAINMENT VACUUM SENSING <br />- - - <br />SYSTEM (SCYS) <br />System Power Requirements Universal AC power supply: 100 to 249VAC, 50/60Hz, 2A max. <br />- - - <br />Vacuum Sensors <br />Display Specifications <br />20 character liquid crystal display <br />AIR VAPOR MONITORING <br />Custom User Access <br />Front Panel Display control through user specific log -in <br />In -Station Diagnostics (ISD) <br />Optional <br />Approvals <br />UL cUL, ATEX, IECEx <br />Carbon Canister Vapor Polisher <br />Optional <br />Vapor Pressure Sensor <br />Optional <br />Third Party Evaluations <br />htto:/� nwq de.org/evals/veeder root zf.html <br />Vapor Flowmeter <br />Optional <br />Product Installation Guide httn//www.Yeedercom/us/technical-document-llb= <br />* Standard In TLS -350R, Upgradeable in TLS-350PLUS <br />www.veeder.com <br />1.898.561.7942 <br />125 Powder Forest Drive - PO Box 2003 - Simsbury, CT 06070 - Cc <br />All information contained in this document <br />-2019 Veeder-Rool - P/N 577014-453 <br />Rev. A <br />