Laserfiche WebLink
2.0 Secondary Containment <br /> Comments/Recommendations <br /> Secondary Containment Type N/A <br /> Secondary Containment Length N/A <br /> Secondary Containment Width N/A <br /> Secondary Containment Height N/A <br /> Secondary Containment Volume (gallons) N/A <br /> Secondary Containment Condition N/A <br /> (breaches,foreign material, liquid) <br /> Secondary Containment Drain Valve N/A <br /> Installed? <br /> Drain Valve Locked? N/A <br /> Sump Pump Installed? N/A <br /> Is The Sump Pump Float Automatically or N/A <br /> Manually Activated? <br /> Other <br /> Observations3.0 Secondary Containment(AST) <br /> Secondary Containment(AST)-D/W, Double <br /> Bottom or Secondary Containment(Pans, Double wall <br /> Boxes or Containers) <br /> ST Containment Condition? Dry? Good/Dry <br /> Drain Valve Installed No <br /> Drain Valve Locked? N/A <br /> Other <br /> Observation4.0 Tank Appurtenances <br /> Ancillary Equipment: Piping/Piping Piping has paint failure and also has paint flaking. There <br /> Connections (leaks, corrosion, supports) Fair is also surface corrosion where paint failure has <br /> occurred.** <br /> Other <br /> Valves Observations_�M Comments/Recommendations <br /> Anti Siphon Valve installed? Yes <br /> Anti Siphon Valve Manufacturer OPW <br /> Anti Siphon Valve Model 199ASV <br /> Is the Anti Siphon Valve Operational And <br /> Properly Sized? es <br /> Fire Valve Installed? No Install a fire valve on product transfer piping through <br /> which liquid could flow through gravity.** <br /> Fire Valve Manufacturer N/A <br /> Fire Valve Model Number N/A <br /> Is the Fire Valve Operational? N/A <br /> Other <br /> ObservationsVents <br /> Normal Vent Manufacturer OPW <br /> Normal Vent Size 2" <br /> Normal Vent Model 523V <br /> Normal Vent Condition Good <br /> Per NFPA 30 2015 21.4.3.3 Normal vents shall be sized <br /> in accordance with either API Standard 2000,Venting <br /> Atmospheric and Low-Pressure Storage Tanks, or <br /> Normal Vent Properly Sized? No another approved standard.Alternatively,the normal vent <br /> shall be at least as large as the largest filling or <br /> withdrawal connection, but in no case shall it be less <br /> than 1? in. (3.2 cm) nominal inside diameter. ** <br /> 4 <br />