Laserfiche WebLink
The DLS-45 battery charger/power converter from IOTA Engineering converts nominal <br />120V A.C. voltage to 13.4V D.C. As a power supply, its tightly controlled regulation al- <br />lows the user to operate any appropriate nominal D.C. load up to the converter's rated <br />output current. As a battery charger, the DLS-45 will maintain the battery, delivering <br />its full -rated current when the battery capacity falls sufficiently low. The voltage is set <br />to deliver its maximum current for the necessary period of time that minimizes undue <br />stress to the battery caused by heating of its cells. This helps to ensure the longest <br />possible life of the battery. Over time, as the battery nears its full capacity, the converter <br />will float -charge the battery to prevent self -discharge of its cells. <br />DC Output Voltage (No Load) approx. <br />13.6V (DC) <br />Output Voltage Tolerance (No Load) <br />+ or -.7% <br />45 Amps <br />Output Amperage, Max Continuous <br />Output Voltage (Full Load) approx. <br />>13.4V (DC) <br />Maximum Power Output, Continuous <br />600 Watts <br />Ripple and Noise <br /><50 mV rms <br />Input Voltage Range <br />108 - 132 AC <br />Input Voltage Frequency <br />47-63 <br />Maximum AC Current (@108VAC) <br />11 Amps <br />Typical Efficiency <br />>80% <br />Max Inrush Current, Single Cycle <br />30 Amps <br />Short Circuit Protection <br />Yes <br />Overload Protection <br />>100% <br />Line Regulation <br />100 mV rms <br />Load Regulation <br /><11% <br />Fan Control' <br />Proportional <br />Thermal Protection <br />YES <br />Working Temperature Range <br />0° - 40° C <br />Storage Temperature <br />-20° to 80° C <br />Withstand Voltage (VDC)"" <br />1700/1700/500 <br />Dimensionst <br />9.7" x 6.7" x 3.4" <br />Weight <br />5.0 lbs <br />two-year warranty. <br />'Proportional = Fan speed proportional to case temperature. <br />"Primary to Chassis/Primary to Secondary/Secondary to Chassis <br />'See reverse side for detailed mounting specifications. <br />IOTA REV 071515 <br />PRODUCT OVERVIEW <br />I DC Output Voltage <br />Output Amperage <br />Input Voltage Range r <br />Input Voltage Frequency <br />APPLICATION <br />Charging for 12V Battery Systems and Operation <br />of 12VDC systems and accessories. <br />FEATURES <br />Clean and steady DC Output operates <br />your loads the way they were intended, <br />avoiding potential damage to systems <br />from errant DC voltage. <br />Built-in protection features guard <br />the unit against erratic line voltage <br />that can occur from shore power or <br />generator supplies. <br />Reverse Polarity Protection to protect <br />against damage from incorrect battery <br />hook-up, using readily available fuse <br />types that are easy to replace. <br />Proportional fan control for <br />W <br />whisper -quiet operation. <br />Charging Jack option for normal <br />and high -stage battery charging <br />applications. <br />Compatible with IOTA IQ <br />IQILf <br />Smart Charger for automatic <br />four -stage charging. <br />0 <br />Covered by IOTA with a full <br />two-year warranty. <br />ADDITIONAL FEATURES INCLUDE... <br />• Switch -mode technology <br />• Current limit, thermal and overload <br />protection <br />• Lower operating temperature <br />I OT A� <br />F IL <br />POWERING YOUR WAV ° <br />P.O. BOX 11846 TUCSON, AZ 85734 <br />(520) 294-3292 • FAX (520) 741-2837 <br />www.iotaengineering.com <br />