Laserfiche WebLink
INTRODUCTION <br /> This Service and Training Manual provided by the Suburban Products Factory Service <br /> Department is intended to be used by qualified service technicians only as a valuable tool <br /> in terms of product identification, troubleshooting and diagnosis of service issues, and as an <br /> outline for information concerning proper procedures for filing warranty service claims. <br /> Included in this manual are product installation instructions, sequence of operation information, <br /> maintenance and service recommendations. In addition to the information available in this <br /> manual, other resources for servicing Suburban Products RV appliances include our website <br /> at www.AIRXCEL.com, our Factory Service Department Support Line at 423-775-2131 <br /> EXT. 7102, and our Customer Service Department Office at 423-775-2131 EXT. 7101. <br /> Having an understanding of the appliance's sequence of operation and access to or knowledge <br /> of the wiring diagram are the cornerstones of proper diagnosis and troubleshooting. Other <br /> points of emphasis encompass the adherence to proper installation methods, voltage and gas <br /> pressure, and compliance to the physical installation tolerances and clearances. This manual <br /> is designed to assist service technicians in making the correct diagnosis efficiently. <br /> Proper maintenance and service of an appliance is of the upmost importance. Failure to keep <br /> the appliance clean and well maintained is a significant contributing factor in the component <br /> breakdown and premature failure of the appliance. <br /> SPECIFICATIONS <br /> BTU/HR 15,000 MIN to 60,000 MAX <br /> FUEL LP Gas (Propane) <br /> INLET PRESSURE MINIMUM 10.5 INCHES W.C. <br /> MAXIMUM 14 INCHES W.C. <br /> MANIFOLD PRESSURE 10.5 INCHES W.C. <br /> WATER OPERATING MINIMUM: 30 LBS PSI <br /> PRESSURE MAXIMUM: 150 LBS PSI <br /> VOLTAGE 12 VDC NOMINAL; <br /> 10.5 VDC MINIMUM TO 14 VDC MAXIMUM <br /> WATER FLOW REQUIREMENT MINIMUM: 0.5 GPM <br /> MAXIMUM: 1.5 GPM <br /> MINIMUM WIRING GAUGE MINIMUM WIRING GAUGE 20 AWG 600V 105°F (Degrees Fahrenheit) <br /> AMP DRAW 2.5AMPS <br /> RECOMMENDED FUSE SIZE 2 FUSES with 5 AMPS per FUSE <br /> NAUTILUS (IW60) ON DEMAND WATER HEATER DIMENSIONS <br /> 12.511Hx12.5" Wx20.0" D <br /> 3 <br />