Laserfiche WebLink
Commercial Electric <br />Water Marathon Eclipse Light Duty <br />Water Heaters <br />Marathon® Eclipse" Light Duty Specifications <br />"Recovery Capacityis based upon a 100° F water temperature rise and calculated per ANSI 221. 10.3 standards <br />• Maximum test pressure: 300 PSI; Maximum working pressure: 150 PSI <br />Factory Installed Element Options <br />Triple Road for 277/240/208 <br />• All models aro factory shipped with aim configuration. <br />Triple Rated Element Option <br />(Allows for flexibility from 277 to 208 or 240 volts) <br />FACTORY SHIPPED <br />VOLTS <br />RATING <br />27] <br />2n <br />AMPS AND <br />240 <br />OTHER RATED <br />240 <br />VOLTAGES <br />20a <br />20B <br />OPERATION <br />Sim <br />Non -Sim <br />Sim <br />Nan-Shn <br />Sim <br />Non -Sim <br />PHASE <br />1 -PH e -PH <br />1-PH&3-PH <br />1 -PH 3 -PH <br />1-PH&3-PH <br />1 -PH 3 -PH <br />1-PH63-PH <br />RATING ik14) <br />12.1 12.t <br />6.0 <br />9.1 9.1 <br />4.5 <br />6.8 6A <br />3.4 <br />BREAKER <br />60 50 <br />30 <br />50 45 <br />25 <br />45 35 <br />20 <br />Consult factory for certification requirements. <br />Recommended Specifications <br />(for trade reference only) <br />Water heaters) shall be model , <br />manufactured by Rheem, having electrical input of <br />kW and a recovery rate of GPH <br />at a 100°F temperature rise. Water heater(s) shall have a <br />storage capacity of gallons. <br />Water heater tank shall be seamless, blow -molded, <br />polybutene surrounded by filament wound fiberglass and <br />rigid polyurethane foam encased in a molded polyethylene <br />outer shell. Water heater shall have a maximum weight <br />of 160 Ids and include a terminal block for non-sim / Sim <br />conversions. Water heater(s) shall have the UL seal of <br />certification and be factory equipped with an CSA/ASME <br />rated temperature and pressure relief valve. Water heater(s) <br />shall meet or exceed the energy factor requirements of <br />ASHRAE. Tanks shall have a working pressure rating of 150 <br />psi, and shall be completely assembled. Water heaters) shall <br />be equipped with titanium sheath elements. Tank shall be <br />insulated with 2-1/2" of rigid polyurethane foam insulation. <br />Water heater(s) shall be equipped with surface mounted <br />thermostats each with an integral, manual reset, high limit <br />control. Water heater(s) shall be covered by a ten year limited <br />warranty against tank leaks. <br />In keeping with Its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice. <br />Rheem Water Heating • 1115 Northmeadow Parkway, Suite 100 Rheem Canada Ltd./Ltee • 125 Edgeware Road, Unit 1 <br />Roswell, Georgia 30076 • www.mmem.com Brampton, Ontario L6Y OPS • www.rheem.ca <br />PRINTED IN 11.5 A.1220 WE FORM NO. RR102CE-MELD R.I. <br />