Laserfiche WebLink
INTERNATIONAL PARK OF COMMERCE SPECIFIC PLAN•PHASE 2 JUNE 24, 2022 <br /> Monument Sign Design Standards within the Wall Sign A Design Standards within the IPCSP2 <br /> IPCSP2 Zone Zone <br /> 1. The maximum number of monument signs Wall Sign A identifies the tenant or tenants <br /> per parcel shall be one per driveway approach located within each building space. Figures 3.8 <br /> (known as a "curb cut") with no more than and 3.9 depict the typical locations for the signage <br /> two monument signs located on each parcel which can be positioned on either the end of <br /> street frontage. The minimum distance building or above the loading docks to allow for <br /> between monument signs located on the maximum visibility. <br /> same parcel street frontage is 700 feet. Two <br /> separate parcels with a shared curb cut may 1. Wall Sign A shall not exceed 300 square feet <br /> both have a monument sign. per individual sign and the combined total <br /> 2. Monument signs shall not exceed 80 square of all Wall Sign A's placed on each building <br /> feet maximum per sign face. frontage shall not exceed 600 square feet. <br /> 3. Maximum monument sign height shall not 2. Wall Sign A shall consist of individually <br /> exceed 8', except that any monument sign mounted letters and logo elements only. <br /> within 10 feet of a public right-of-way shall not 3. Maximum wall sign width including logo shall <br /> exceed 6 feet in height. be a maximum of 80% of the width of the <br /> 4. Maximum monument sign width shall not architectural element that the sign is placed <br /> exceed 10'. on. See Figure 3.6. <br /> 5. Monument signs shall not obstruct vehicular 4. See Figures 3.8 and 3.9 for typical building <br /> sight lines, as set forth in the San Joaquin signage locations. <br /> County Municipal Code. <br /> Wall Sign B Design Standards within the IPCSP2 <br /> Directory and Directional Signage within the Zone <br /> IPCSP2 Zone Wall Sign B identifies the address for the building <br /> Directory and Directional signs will assist visitors and may include a logo element. Placement and <br /> with on-site wayfinding, denote the location of height of wall sign B is subject to building and fire <br /> business entries and to assist with on-site vehicle department regulations <br /> circulation. Directory and directional signs shall <br /> be located a minimum of 50 feet from a public 1. Wall Sign B shall not exceed 30 square feet per <br /> right-of-way and must be oriented to serve on-site individual sign and shall be limited to no more <br /> visitors, see Figure 3.5. than two Wall Signs B's placed on each building <br /> frontage. <br /> Wall Signs within the IPCSP2 Zone 2. Wall Sign B shall consist of individually mounted <br /> It is important that wall signs be proportional letters and logo elements only. <br /> to the building scale and mass. Due to the size, <br /> building mass, and building setbacks from the <br /> street frontages, wall signs will be allowed as <br /> follows. <br /> CHAPTER 3 <br /> 3-12 <br />