Laserfiche WebLink
Section 8. Exposure controls/personal protection <br />Respiratory protection : Based on the hazard and potential for exposure, select a respirator that meets the <br />appropriate standard or certification. Respirators must be used according to a <br />respiratory protection program to ensure proper fitting, training, and other important <br />aspects of use. <br />Section 9. Physical and chemical properties <br />Appearance <br />Physical state <br />Color <br />Odor <br />Odor threshold <br />pH <br />Melting point <br />Boiling point <br />Flash point <br />Evaporation rate <br />Flammability (solid, gas) <br />Lower and upper explosive <br />(flammable) limits <br />Vapor pressure <br />Vapor density <br />Relative density <br />Solubility <br />Partition coefficient: n- <br />octanol/water <br />Auto-ignition temperature <br />Decomposition temperature <br />Viscosity <br />Molecular weight <br />Aerosol product <br />Heat of combustion <br />Liquid. <br />Not available. <br />Not available. <br />Not available. <br />Not available. <br />Not available. <br />55°C (131°F) <br />Closed cup: 9°C (48.2°F) [Pensky-Martens Closed Cup] <br />5.6 (butyl acetate = 1) <br />Not available. <br />Lower: 1.2% <br />Upper: 19% <br />3.2 kPa (23.998 mm Hg) [at 20°C] <br />1.5 [Air= 1] <br />0.94 <br />Not available. <br />Not available. <br />: Not available. <br />: Not available. <br />: Kinematic (room temperature): >0.205 cm2/s (>20.5 cSt) <br />Kinematic (40°C (104°F)): >0.205 cm2 /s (>20.5 cSt) <br />: Not applicable. <br />: 19.98 kJ/g <br />Section 10. Stability and reactivity <br />Reactivity : <br />Chemical stability : <br />Possibility of hazardous : <br />reactions <br />Conditions to avoid : <br />Incompatible materials : <br />No specific test data related to reactivity available for this product or its ingredients. <br />The product is stable. <br />Under normal conditions of storage and use, hazardous reactions will not occur. <br />Avoid all possible sources of ignition (spark or flame). Do not pressurize, cut, weld, <br />braze, solder, drill, grind or expose containers to heat or sources of ignition. Do not <br />allow vapor to accumulate in low or confined areas. <br />Reactive or incompatible with the following materials: <br />oxidizing materials <br />Date of issue/Date of revision : 6/4/2016 Date of previous issue : 6/3/2016 Version :3 9/17