Laserfiche WebLink
Underground Storage Tank <br /> Monitoring System Certification Form <br /> 8. IN-TANK GAUGING TESTING <br /> ® Check this box if tank gauging is used only for inventory control. <br /> ❑ Check this box if NO tank gauging equipment is installed. Yes No NA <br /> Do not complete this section if either box is checked. <br /> All wiring has been: 1) visually inspected for kinks, breaks and proper entry and 0 0 0 <br /> termination; and 2 tested for ground faults? <br /> Were all in-tank gauging probes visually inspected for damage and residue buildup ❑ ❑ <br /> to ensure that floats move freely, functionally tested, and confirmed operational? <br /> Was accuracy of system's product level readings tested? ❑ ❑ ❑ <br /> Was accuracy of system's water level readings tested? ❑ ❑ ❑ <br /> Were all probes reinstalled properly? ❑ ❑ ❑ <br /> Were all items on the equipment manufacturer's maintenance checklist completed? ❑ ❑ ❑ <br /> Probe ID Probe Model Tanks Monitored Pass Fail <br /> ❑ 0 <br /> 0 0 <br /> ❑ 0 <br /> ❑ IM <br /> 9. COMMENTS <br /> Describe all answers marked "No"or "Fail"and proposed remedy. <br /> List all monitoring equipment either replaced or repaired. <br /> Removed approx 3 Cups of liquid from Diesel STP Sump <br /> Removed approx 17.75 Gallons of liquid from Diesel Fill Sump <br /> All Float and chain assemblies in UDC 5-6 needed cleaning before passing results were <br /> achieved. <br /> The 87 and Diesel Products float and chain assemblies in UDC 3-4 required cleaning before <br /> passing results could be achieved. <br /> The 87 Tank Annular sensor did not respond correctly during testing. This sensor was <br /> replaced with like sensor and testing where passing results were achieved. <br /> Backup battery in monitor tested under voltage and was replaced with new. <br /> Page 5 of 6 <br />