Laserfiche WebLink
Dualoy° 3000/L Fittings Dimensions Product Data <br /> Units All dimensions are in U.S. Customary units (inches). <br /> Diametric dimensions are maximums. <br /> Insertion depths (X1,X2) are typical. <br /> All weights (lb) are approximate. <br /> Tolerances Tolerance for centerline-to-face dimensions on fittings with bell-end configuration is ±1/16 <br /> inch. <br /> Listings Dualoy 3000/L is Listed in the U.S. with Underwriters Laboratories for nonmetallic <br /> underground piping for motor vehicle(MV),high blend(HB),concentrated(CT)and aviation <br /> and marine (A&M) fuels (File MH9162). Dualoy 3000/L pipe and fittings are also listed with <br /> Underwriters Laboratories of Canada (File CMH 715). In Great Britain the Dualoy 3000/L <br /> system has been tested and accepted by the London Fire and Civil Defence Authority. <br /> Dualoy 3000/L has been issued a Certificate of Compliance to the Institute of Petroleum (IP) <br /> Specification by ERA Technology, Ltd. <br /> End Configurations Bell end is standard. <br /> Taper Angle The taper angle on all bell and spigot end configurations is 13/4'. <br /> Pressure Ratings See publication Dualoy 3000/L Fiberglass Pipe and Fittings, FP265,for pressure ratings. <br /> Individual system components may not have the same ratings as the pipe. Refer to the <br /> detailed product information for the specific components to determine the pressure rating <br /> for the system as a whole. <br /> Manufacturing Methods The fiberglass-reinforced epoxy resin fittings shown in this document are manufactured by <br /> filament winding or compression molding. <br /> Adapters: bell x NPT female Flange rings <br /> Adapters: bell x NPT male Flange stub ends <br /> Adapters: isolation Nipples <br /> Adapters: spigot x NPT female Reducer bushings <br /> Adapters: spigot x NPT male Repair couplings <br /> 45° Elbows Sleeve couplings <br /> 90° Elbows Sump penetration pieces <br /> End caps Tees <br /> www.fgspipe.com • fgspipe@nov.com <br /> ISI Fiber Glass Systems <br />