Laserfiche WebLink
RECEIVED BY EHD <br /> 7/18/2022 - during inspection <br /> i� Fill Miser <br /> OPW <br /> Sall Float <br /> 14"Minimum <br /> Clearance for <br /> Tube Cut Float <br /> per local 4" NPT <br /> Requirements Nipple <br /> a <br /> �--- Align Float Along Length of Tank —�� Swivel <br /> Figure 24 Product ® Jack <br /> Adaptor Screw <br /> Kit <br /> Orient socket <br /> adaptor be- FOR TESTABLE MODELS ONLY: Check installation <br /> tween jack again as done in Step 23 to ensure poppet actuates and <br /> screw baits resets properly. See page 17 for full testing details. Ap- <br /> ply pipe dope to the socket adaptor threads. Pipe dope <br /> should be a non-hardening gasoline resistant pipe <br /> thread seal compound. Install socket adaptor and <br /> torque to 3.5 ft-lbs{42 in-lbs}rn1nimurn to 5.0 ft lbs[60 <br /> in-lbs]maximum. After installing socket adaptor where <br /> required,pressure test testable overfill valve per CARE <br /> TP201.1 D to ensure valve is vaportight. <br /> Figure24A <br /> 15 <br />