INSTALL_2022 - Laserfiche WebLink

Home Browse Search

SUBMERSIBLE PUMPING SYSTEMS r ^ Franklin Fueling Systems I SUBMERSIBLE TURBINE PUMPS _ T Specifications -� • 11/2 Hp fixed speed models are available in variable Power Requirements + length and fixed length options. e 11/2 Hp fixed speed models require single-phase, • Check valve:2 3/4'diameter fluorocarbon seal 208-230 VAC, 60 Hz incoming power. constructed with cast aluminum body and steel backing washer. • 11/2 Hp fixed speed models incorporate a starting and running capacitor,with internal bleed resistor, • Pressure relief valve:available in four pressure relief rated 370 Volt, 15 microfarad. settings, integral to check valve.Standard model •STP-SCI single-phase smart controllers and STP-CBS relieves at 40 psi and resets above 35 psi. single-phase control boxes are available for 11/2 Hp •Syphon:venturi-type syphon primer supplied with pump control. every submersible.Syphon check valve and • Max. motor draw: 1 1 Amps. secondary syphon sold separately. •Air eliminator:every submersible includes a tank return Liquid Compatibility path with one-way check valve to provide active air •Max. liquid viscosity: 70 SSU at 60 OF (15 OC). elimination. • Electrical disconnect: electrical yoke for positive •Standard STP models are UL and cUL listed for fuel contractor disconnect during service. mixtures containing up to 10%ethanol with gasoline, and 20%MTBE,20%ETBE or 17%TAME with gasoline. Pump Motor •STPAG (AG compatible) models are UL and cUL listed • 11/2 Hp fixed speed,3450 rpm, multi-stage centrifugal for fuel mixtures containing diesel fuel with up to 20% type pump motor with integral,automatic,thermal biodiesel, 100%biodiesel, up to 85%ethanol with overload protection. gasoline,and 20%MTBE,20%ETBE or 17%TAME with gasoline. •Standard pressure (150,two-stage) model, max. pressure=34 psi. • 11/2 Hp fixed speed models can also be used with • High pressure (H150,three-stage) model, max. diesel fuels,fuel oils, kerosene,Avgas and jet fuels in a non-gelled pourable state. pressure=46 psi. •All wetted elastomers are made of a high grade, Approvals fluorocarbon compound. •cULus listed. Quality Certification •Consult factory for applicable approvals. • Franklin Fueling Systems is an ISO 9001 Certified Manufacturer. Performance 1 Y Hp Fixed Speed Turbine Performance Chart 11/2 Hp High Pressure Fixed Speed Turbine Performance Chart 110---------------- - 140 '-_ ----------- ---------------------- ---------------------- ----------- 130 --------- -- ------ --z------------------ --------------------- 120 ---------- ---- ----- ------- ------------ ---------------------- ----------- 90 ` ------- ----- - ------ ------- •cam--- ------- ------ Two STP150 Manifolded - ' 1'/Hp Pumps 110 ---------- ---- --- -- ---------------�-,---- - Two STPH150 Manifolded 11/2 Hp High Pressure Pumps w80 ------- ----- ---- -- ------- -----`- '•----- ---- --- 100 ---------- ----------- ---------------------- ------- 90 ---------- ----------- - -------------------- -- --------------- - ----------- , LL _ 80 a 60 - - ------- o ---------------- ----------- ------ - -------- x One STPH150 11/2 Hp 1• a 50 - One STP1501'/Hp PumP __ _________________ _______ __c,__ _ _____ _______ O 60 ___ High Pressure Pump __ _______________ ---------------,-____ _ ___________ o � 40 _______ _________ 50 ________________. - - ___________ ______ _______ _______ _______ _______ _______ _______ _______ __________ ___________ ________ _____________ _ 40 -------- -------- ------------ ------- ------- ------- ------- -- ---- ------- ------- ------- ----+-- --------- ---------- --------- -- 30 30 20 ------ ------- ------- ---- -- ------- ------- ------- ------- ':------- 20 10 ------ ------- ------- ------- - ------- ------- ------- ------- ---' 0 0 0 20 40 60 80 100 120 140 160 180 200 0 20 40 60 80 100 120 140 Flow in Gallons per Minute fgpm) Flow in Gallons per Minute(gpm) Note:Performance based on pumping solvent(0.78 specific gravity).Pressure is taken at the manifold Note,Performance based on pumping solvent(0.78 specific gravity).Pressure is taken at the manifold discharge outlet STP150 models are powered by asingle-phase,60 Hz,208/230 Vol}power supply. discharge outlet.STPH 150 models are powered by a single-phase,60 Hz,208/230 Volt power supply.