CORRESPONDENCE_1990-1993 - Laserfiche WebLink

Home Browse Search

k% KLEINFELDER chain-of-custody to an analytical laboratory certified by the state for the planned chemical analysis. A-3.3 Sample Handling After labeling, the sample is immediately stored in an iced cooler for transport to the analytical laboratory. The label includes Kleinfelder's name, job number, the date and time the sample was collected, the employee number of the individual who performed the sampling, and a unique five-digit sample identification number. A custody seal is also placed on the sample in such a way that any attempt to tamper with the sample is easily visible. An example of a sample label and custody seal are attached at the end of this appendix. A Kleinfelder chain-of-custody form is attached to the cooler. The chain-of-custody form includes Kleinfelder's name, address and telephone number, the employee number of the individual who performed the sampling, the sample numbers, the date and time the samples were collected, the number of containers each sample occupies, and the analyses for which the samples are being submitted. The chain-of-custody form is signed by each person who handles the samples, including all Kleinfelder employees and the receiving employee of the analytical laboratory when the samples are delivered. An example of the chain-of-custody form is attached. A-3.4 Equipment Decontamination To reduce the potential for cross-contamination between wells, all developing and sampling equipment is washed in a trisodium phosphate solution and rinsed in distillel Ift—ter or steam cleaned prior to use in the next monitoring well. A-3.5 Well Survey The locations of soil borings and monitoring wells and the elevation of the top of the PVC casings is usually surveyed and tied into permanent markers, if readily available. Survey accuracy is 0.1 foot for the "x" and "y" coordinates and .01 foot for the "z" coordinate. The depth to static ground water is measured from a set location at the top of the PVC casing. The depth of water is then subtracted from the elevation of the top of the well casing to provide a ground water elevation for each monitoring well location.