Laserfiche WebLink
------------------------------------------------------------------------------------------------------------------------------------------ <br /> Applus RTD <br /> Valley Industrial X-Ray and Inspection Services Inc. <br /> UltraPIPE Inspection Data Management <br /> <br />------------------------------------------------------------------------------------------------------------------------------------------ <br /> <br /> Page:2 <br /> (Report in Inches, Corrosion Rates in MPY) Report Date: 11/06/2017 07:37:40 <br /> Analysis: Straight Line <br /> <br /> Unit: AB-STOCK Flange Rating: 0 lb/in² <br />Eq/Circ ID: T-619 Fill Height: N/A <br /> Eq Type: TANK Description: Design Temp: 50 °F <br /> Class: 25,000 GALLON BIODIESEL STORAGE TANK <br /> RBI: <br />-------------------------------------------------------------------------------------------------------------------------------------------------------------- <br /> <br />TML Corrosion Rates are each the maximum of: <br />(A) -- Calculated Corrosion Rates x 1.00 : Varies <br />(B) -- Default Corrosion Rate : 2.0 MPY <br /> <br /> <br />Representative Corrosion Rate is the Maximum of: <br />(A) -- Average Corrosion Rate x 1.10 : Not Used. <br />(B) -- Average Max 25.0% of TMLs, Min of 2 : Not Used. <br />(C) -- Formula Corrosion Rate (Sigma = 1.28) : Not Used. <br />(D) -- Default Corrosion Rate : 2.0 MPY <br />Representative Corrosion Rate = 2.0 MPY <br /> <br />TML thickness readings taken above 150.0 °F have been compensated by 1% per 100.0 °F <br /> <br />TML thickness readings have not been compensated for growths. <br /> <br />TML Life calculations are based on the Representative TML Corrosion Rate using Short <br />Term and Long Term Corrosion Rates. <br /> <br />Nominal thickness is used for TML corrosion rate calculations with less than 3 surveys. <br /> <br />Minimum time between inspections required for corrosion rate calculation is 6 months. <br /> <br />TML Inspection Interval is: <br /> (A) -- Minimum( TML Life / 2.00, 5.00 years ) <br /> <br />Eq/Circ ID Last Survey Date is based on the LAST of the last 0% of TML survey dates (Min 1). <br /> <br />Eq/Circ ID Estimated life = 26.2 years from the most recent survey date. <br />(Estimated Life is based on the average of the earliest 0% (Min 1) TML retirement dates.) <br /> <br />Predicted Eq/Circ ID Retirement date is 01/07/2044 <br /> <br />Recommended Eq/Circ UT/RT Inspection Date is 10/23/2022 <br />UT/RT Inspection Interval is the minimum( Remaining life / 2.0, 5.00 years ). <br /> <br />Caution TML Logic: TML Corrosion Rate > 15.0 MPY .OR. TML Remaining Life < 1.00 Years. <br /> <br />There are 0 Caution TMLs in this Eq/Circ ID. <br />