COMPLIANCE INFO_2023 HEATH & SAFETY PLAN

Home Browse Search

MATERIAL SAFETY DATA SHEET - CALIBRATION CHECK GAS 2 PRODUCT NAME: ISOBUTYLENE (1 PPM – 0.9%) IN AIR INGESTION EFFECTS: Ingestion unlikely. Gas at room temperature. INHALATION EFFECTS: Due to the small size of this cylinder, no unusual health effects from over-exposure are anticipated under normal routine use. NFPA HAZARD CODES HMIS HAZARD CODES RATING SYSTEM Health: 1 Health: 1 0= No Hazard Flammability: 0 Flammability: 0 1= Slight Hazard Reactivity: 0 Reactivity: 0 2= Moderate Hazard 3= Serious Hazard 4= Severe Hazard ___________________________________________________________________________ 4. FIRST AID MEASURES EYES: N/A SKIN: N/A INGESTION: Not required INHALATION: PROMPT MEDICAL ATTENTION IS MANDATORY IN ALL CASED OF OVEREXPOSURE. RESCUE PERSONNEL SHOULD BE EQUIPPED THE SELF-CONTAINED BREATHING APPARATUS. Victims should be assisted to an uncontaminated area and inhale fresh air. Quick removal from the contaminated area is most important. If breathing has stopped administer artificial resuscitation and supplemental oxygen. Further treatment should be symptomatic and supportive. ___________________________________________________________________________ 5. FIRE-FIGHTING MEASURES These containers hold gas under pressure, with no liquid phase. If involved in a major fire, they should be sprayed with wat er to avoid pressure increases, otherwise pressures will rise and ultimately they may distort or burst to release the contents. The gases will not add significantly to the fire, but containers or fragments may be projected considerable distances - thereby hampering fire fighting efforts. ___________________________________________________________________________ 6. ACCIDENTAL RELEASE MEASURES In terms of weight, these containers hold very little contents, such that any accidental release by puncturing etc. will be o f no practical concern. ___________________________________________________________________________ 7. HANDLING AND STORAGE Suck back of water into the container must be prevented. Do not allow backfeed into the container. Use only properly specif ied equipment which is suitable for this product, its supply pressure and temperature. Use only in well-ventilated areas. Do not heat cylinder by any means to increase rate of product from the cylinder. Do not allow the temperature where cylinders are stored to exceed 130oF (54oC). ___________________________________________________________________________ 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Use adequate ventilation for extended use of gas.