Laserfiche WebLink
SATC7) <br />Sulphuric Acid, 93-99% <br />Section 9: Physical and Chemical Properties <br />PRODUCT CRITERIA <br />APPEARANCE - COLOR: Clear, colorless to amber (light) <br />PHYSICAL STATE: Liquid (oily liquid, clear to turbid) <br />ODOR: Odorless <br />ODOR THRESHOLD Not available <br />PH <1(1% solution/water <br />MELTING POINT/FREEZING POINT: -31°F to 52°F (-35°C to 11°C) <br />INITIAL BOILING POINT AND BOILING RANGE: 379°F to 621°F (193°C to 327°C) at 760 mm Hg <br />FLASH POINT: Not Applicable <br />EVAPORATION RATE: Not available <br />FLAMMABILITY (Solid, gas) Not Available <br />UPPER/LOWER FLAMMABILITY OR EXPLOSIVE <br />LIMITS Not available <br />VAPOR PRESSURE <1 Mm Hg, 77°F <br />VAPOR DENSITY (AIR = 1) 3.4 [Air = 1] <br />RELATIVE DENSITY ((425 °C): 1.84 <br />SOLUBILITY(IES) Yes (water) <br />OXIDIZING PROPERTIES Not available <br />PARTITION COEFFICIENT: n-octanol/water Not available <br />AUTO IGNITION TEMPERATURE Not available <br />DECOMPOSITION TEMPERATURE >340°C <br />VISCOSITY 28 — 36 cP @60°F <br />Section 10: Stability and Reactivity <br />Reactivity: Reacts violently with water, organic substances and base solutions <br />with evolutions of heat and hazardous mists. <br />Chemical Stability: Stable under recommended storage conditions. <br />Possibility of Hazardous Reactions: Under normal conditions of storage and use will not occur. <br />Reacts violently with water <br />Conditions to Avoid: Heat, sources of ignition <br />Incompatibility (Materials to Avoid): Bases, Halides, Organic materials, Carbides, fulminates, Nitrates, <br />picrate's, Cyanides, Chlorates, alkali halides, Zinc salts, permanganates, <br />e.g. potassium permanganate, Hydrogen peroxide, Azides, Perchlorates., <br />Nitromethane, phosphorous, Reacts violently with:, cyclopentadiene, <br />cyclopentanone oxime, nitroaryl amines, hexalithium disilicide, <br />phosphorous(III) oxide, Powdered metals <br />Hazardous Decomposition Products: Possibility of decomposition if heated and in contact with sources <br />of ignition. Release of toxic gases and vapors (sulfur oxides SO2, <br />S03). <br />Product Sulphuric Acid <br />Q0130 Original- 4.29.15 A.E.E. <br />SDS Page 6 of 10