Laserfiche WebLink
Model 401 & 403 Pass'Thru <br /> ® Anthony® Service and Installation Instructions <br /> A�.CONMW 99-21972-SO01 Rev. A <br /> Electrical Information for Normal Temp Doors, Frames & Light Fixtures <br /> (Heater Amperages @ 120 Volts) <br /> NUMBER OF DOORS 1 2 3 4 5 6 7 8 9 10 <br /> STYLE: Normal temp doors with heaters. 3-Pane, Non-Heated Glass <br /> APPLICATION: Case Temperature: 33°F. Relative Humidity: 68%, In-Store @ 75°F ambient <br /> 23 x 67 0.72 1.45 2.17 2.89 3.62 4.34 5.06 5.78 6.51 7.24 <br /> 23 x 75 0.81 1.63 2.44 3.26 4.07 4.88 5.70 6.52 7.33 8.14 <br /> 26 x 67 0.76 1.51 2.27 3.02 3.78 4.54 5.29 6.04 6.81 7.56 <br /> 26 x 75 0.82 1.64 2.45 3.27 4.09 4.90 5.72 6.54 7.35 8.17 <br /> 28 x 75 0.88 1.76 2.64 3.52 4.40 5.28 6.16 7.04 7.92 8.80 <br /> 28 x 79 0.94 1.88 2.82 3.76 4.70 5.64 6.58 7.52 8.46 9.40 <br /> 30 x 67 0.82 1.64 2.46 3.28 4.10 4.92 5.74 6.56 7.38 8.20 <br /> 30 x 75 0.87 1.73 2.60 3.47 4.33 5.20 6.07 6.94 7.80 8.67 <br /> 30 x 79 10.96 1 1.92 12.88 13.84 14.80 15.76 16.72 17.68 18.64 9.60 <br /> 11 12 13 14 15 16 17 18 19 20 AMPS/LIGHT <br /> 23 x 67 7.95 8.67 9.40 10.12 10.86 11.56 12.31 13.02 13.73 14.48 0.55 <br /> 23 x 75 8.96 9.78 10.58 11.40 12.21 13.04 13.84 14.66 15.47 16.28 0.55 <br /> 26 x 67 8.31 9.06 9.82 10.57 11.34 12.08 12.85 13.62 14.35 15.12 0.55 <br /> 26 x 75 8.99 9.81 10.62 11.44 12.26 13.08 13.89 14.71 15.53 16.35 0.55 <br /> 28 x 75 9.68 10.56 11.44 12.32 13.20 14.08 14.96 15.84 16.72 17.60 0.55 <br /> 28 x 79 10.34 11.28 12.22 13.16 14.10 15.04 15.98 16.92 17.86 18.80 0.55 <br /> 30 x 67 9.02 9.84 10.66 11.48 12.30 13.12 13.94 14.76 15.58 16.40 0.55 <br /> 30 x 75 9.54 10.41 11.27 12.14 13.01 13.88 14.74 15.61 16.48 17.35 0.55 <br /> 30 x 79 110.56 11.52 112.48 13.44 14.40 15.36 116.32 17.28 18.24 19.20 1 0.55 <br /> NOTES: <br /> 1. All amperages are design amperages subject to the following tolerances: units with rail <br /> heaters only +/- 5%, units with rail heaters and heated glass +/- 8%. <br /> 2. Amperages are calculated at 120 volts, but all doors are designed to operate without <br /> sweating when used within the application parameters with a voltage range of +/- 10%. <br /> 3. When calculating lamp amperage, add 1 lamp to the number of doors in the line-up <br /> and multiply that number by the appropriate amps per light value <br /> 4. Design parameters do not make allowances for air leaks or unusual air flow patterns <br /> within cases. Some sweating may occur at upper limits of temperature or humidity. <br /> 77777_ <br />