WORK PLANS - Laserfiche WebLink

Home Browse Search

STERO SCT-76 vw_ RACK CONVEYOR SERIES Design: Two tank 20" Rack Conveyor, 76" in length with Standard Electrical Features:All motors on STERO Ion- a power wash, power rinse and a sanitizing final rinse. veyor machines are factory wired in waterproof conduit Flexible strip curtains at each end separate the washing, and fittings to a common connection point. The motors rinsing and final rinse. Two large inspection doors allow are protected by thermal-overloads with manual reset easy access to interior of machine. All components are buttons. The magnetic motor starters, start-stop switches, easily accessible for cleaning and maintenance. and electric tank heating element contactors (when spec- ified) are mounted in a stainless steel control box for one Construction: Tank and hood are formed from 300 point connection. series No. 4 mill finish stainless steel, fully welded with a minimum of bolt together construction. Frame is heavy- Door Safety Switch: Prevents the machine from oper- duty stainless steel flat stock construction conforming ating if the door is open. The machine will automatically to National Sanitation Foundation (NSF) Standard No. 3. shut-off if the door is opened while the washer is running. The machine is supported by enclosed stainless steel feet. All internal piping, fittings, risers and manifolds are Thermometers:One each for wash, rinse, and final rinse. stainless steel. Pumps & Motors: 2 HP, 1750 rpm, 225 GPM, heavy duty Power Wash:STERO's unique stainless steel manifolds are with sealed bearings and overload protection.The pumps center-fed, fitted with stricture free jets with directional have easily removable inspection plates—front and end— vanes and can be easily removed without tools. Cen- and are self draining. Stainless steel perforated strainer ter fed manifolds distribute an even flow of wash water pans cover the tank. over the entire perimeter of the rack, ensuring consis- tent results. The SCT-76 distributes 225 GPM of detergent TANK HEATING OPTIONS water pumped over the ware by a 2 HP motor and pump Electric: Stainless steel elements totaling 25 KW are assembly. mounted in the power wash (10KW) and power rinse Power Rinse: Center-fed manifolds fitted with stricture (15KW) tanks. The units are thermostatically controlled free jets with directional vanes and can be easily removed and have STERO's low water protection system. The ele- without tools. An even distribution of rinse water fully ments, thermostat, LWP and contactor are all inter-wired covers the rack, ensuring consistent results. The SCT-76 to the control panel. distributes 225 GPM of rinse water pumped over the ware Steam Injectors: Two stainless steel injectors with by a 2 HP motor and pump assembly. silencers are mounted in the tank. A thermostat con- Final Rinse: Stainless rinse arms mounted above and trols a special solenoid valve, and maintains the correct below are fitted with directional fanjets, which create temperature. a full coverage spray pattern for maximum rinsing and Steam Coils: STERO designed and built stainless steel sanitation. The rack activates STERO's final rinse switch steam coils are mounted in the tank. Steam coils allow and hot water solenoid valve with stainless steel seat. condensed steam to be returned to the steam generator, A vacuum breaker mounted downstream from the sole- a decided advantage when there is a question of steam noid and 6" above the upper rinse complete STERO's rinse purity. A thermostat controls a special steam solenoid system. valve and maintains the correct temperature. A steam Conveyor: A center-drive stainless steel pawl bar with trap is mounted on the steam return line. stainless steel pawls conveys the racks through the spray pattern and out onto the clean dish table.The conveyor is powered by an integral 1/4 HP motor and speed reducing drive which has a built-in release to prevent damage to racks or machine in the event of a rack jam.The racks ride on 12 gauge stainless steel tracks. In line with its policy to continually improve its products,Stero reserves the right to change materials and specifications without notice. Page 4 of 4 STERO,a division of Illinois Tool Works,Inc. 1758 Corporate Circle Petaluma, CA 94954 ST50419(08/15) Phone: 800-762-7600 Fax: 707-762-5036 Website: Stero.com