Laserfiche WebLink
any repairs made before or during the tightness test must be described in <br />the COMMENTS section. <br />Page 3 of 5 <br />Additional copies of this page may be attached. <br />Test Method Developed by Manufacturer Industry Standard Professional Engineer <br />Test Type Pressure Vacuum Hydrostatic <br />Test Equipment Used: F.F.S. Incon TS-STS Sump Tester w/ + or <br />Sump/UDC ID UDC 1-2 Diesel STP <br />Sump Manufacturer Bravo Western Fiberglass <br />Sump Depth (inches) <br />Sump Bottom to Top of <br />Highest Pipe Penetration <br />(inches) <br />Pipe comes in <br />from bottom of <br />UDC <br />Test Start Time 12:33pm 12:33pm <br />Initial Reading <br />Test End Time 12:48pm 12:48pm <br />Final Reading <br />Change in Reading - <br />Pass/Fail Criteria + or 0.002 + or 0.002 + or 0.002 + or 0.002 <br />Tightness Test Results Pass Fail Pass Fail Pass Fail Pass Fail <br />Sump/UDC ID <br />Sump Manufacturer <br />Sump Depth (inches) <br />Sump Bottom to Top of <br />Highest Pipe Penetration <br />(inches) <br />Test Start Time <br />Initial Reading <br />Test End Time <br />Final Reading <br />Change in Reading <br />Pass/Fail Criteria + or 0.002 + or 0.002 + or 0.002 + or 0.002 <br />Tightness Test Results Pass Fail Pass Fail Pass Fail Pass Fail <br />Additional copies of this page may be attached. <br />8. SUMP/UDC TEST