Laserfiche WebLink
STEP 25: INSTALL WARNING PLATE <br />Bend the three warning plate ears down then slide <br />the tie wrap over the warning plate ears and position <br />warning plate against riser pipe approximately 1" <br />below the adaptor. Tighten the tie wrap securely. <br />The valve is now fully installed and in operating <br />position. <br />Plate <br />Figure 25 <br />STEP 26: VALVE REMOVAL <br />The valve can be removed for tank leak testing, <br />inspection, etc., by removing the Rotatable Product <br />Adaptor, the 4" nipple, and the Jack Screw Kit. <br />Reinstall per the above instructions. <br />STEP 27: ELECTRONIC LIQUID LEVEL <br />MONITORING <br />If an electronic level monitor is installed, it must be <br />calibrated to match the top of the 71 SO valve body, <br />which must correlate with 95% of the actual tank <br />capacity. <br />Manufacturer: "OPW" <br />Model: 71 SO -4" <br />0" represents size) <br />anufacture Date: <br />"MFG MMYY" <br />MM=Month YY=Year <br />Figure 26 — Product Identification <br />73 <br />