Laserfiche WebLink
/APM <br /> R&r AQ�UASTAR4 <br /> .`Air <br /> , <br /> Third-Party Tested pool products <br /> CERTIFICATION OF COMPLIANCE <br /> Outlet32" Channel Drain Flat Grate Anti-Entrapment Suction <br /> Manufacturer: <br /> \\\. <br /> AquaStar Pool Products, Inc., <br /> 2340 Palma Dr. #104 <br /> Ventura, CA 93003 <br /> Part Number Part#: 32CDFLFRxxx <br /> Flow Ratings: Floor - 316 GPM Wall - 208 GPM <br /> Minimum Sump Depth: <br /> 3 inches under entire length of cover <br /> This is to certify that this model number meets or exceeds the requirements of Section 1404(b)of the Virginia <br /> Graeme Baker Pool&Spa Safety Act(VGB-2008),ASME/ANSI A112.19.8-2007,ANSI/APSP-16-2011 <br /> standards and safety regulation 16CFR 1450 Virginia Graeme Baker Pool and Spa Safety Act Regulations set <br /> forth by the Consumer Product Safety Commission. <br /> This product was tested to the aforementioned safety regulations,commencing February 2008 and it is <br /> recertified annually through continuous compliance inspections by IAPMO Research&Testing 5001 East <br /> Philadelphia Street,Ontario,California 91761-2816,Phone(909)472-4100. <br /> The test results supporting the product certification is maintained by Steve Ohnemus 2340 Palma Dr.#104 <br /> Ventura,CA 93003,Phone:877-768-2717x5021,Email:SteveO@aquastarpoolproducts.com. <br /> Installation Record <br /> 3 4s The date of manufacture is represented by a <br /> V 114 T time stamp located on the product. The year is <br /> Date of Manufacture: �r0�6� in the center and an arrow points to the month. <br /> Description of Drain Location: <br /> Date Installed: Expiration Date: <br /> (With or without water in pool or spa) (Five years from installation) <br /> Installed by: <br /> (877) 768-2717 - www.aquastarpoolproducts.com - info@aquastarpoolproducts.com <br />