INSTALL_2024 - Laserfiche WebLink

Home Browse Search

Secondary Containment Vacuum Sensing System Maximize protection with a vacuum monitored secondary containment v , system . A Secondary Containment Vacuum Features and Benefits Facilitates periodic operability testing Sensing System for use with Veedery Satisfy Requirements Leverage Existing Veeder--Root Systems `-e'Root's ATG Systems. The Secondary • er t0 meet California's requirement for • Uses STP as the vacuum source and works with secondary space morritoring for tanks and lines Red jacket and FE STPs Containment Vacuum Sensing (SCVS) as required by AB 2481 a Installs in the SIT sump and connects to the System is designed to detect leaks in double- . Satisfies the requirements for Class I Leak walled tanks and piping systems while Detection as defined by the European console vta mmrmsrcall3 helping to contain a release of product while safe wiring EN 13160-2 • Able to share wiring conduit with other Needer--Root intrinsically safe(IS)probes and 3rd Party National Vrbrk Group and LG113 under vacuum. The system consists of: listed sensors including stump or line leak sensors • Interfaces to the Smart Sensor Interface with • Vacuum Sensors, connected to tank, Reduce Exposure to Risk Embedded Pressure Module Alarms when vacuum cannot be nuintanred Provides for positive shut down of pressurized sump or piping interstices or when replenish rate exceeds 85 liters per hour lines when required • A Submersible Turbine Pump (STP), 0 The system alarms when liquid is detected in Simple installation,no need to mess with brine to provide a source of vacuum thesecondary space • A Smart Sensor Interface with Embedded Pressure Module in a TLS-350 Operating Temperature Rating: Console Capability Monitoring System -25 degrees C to +70 degrees C The Vacuum Sensor is compatible with the following consoles: The Vacuum Sensor is interfaced to Veeder- Cable Length: Console 8 feet TLS-350R/EMC w/BIR Root's TLS-350 Monitoring System via TLS-350 Plus/EMC Enhanced* intrinsically safe wiring to provide system Sensor Dimensions: TLS-350/EMC* status, replenish rate, alarm, and diagnostic 5" high x 5"wide 2" deep *Upgrade Note:The Vacuum Sensor System requires the console to have version 24C software(or greater) information, along with an ECPU2 or ECPU w/NVMEM 1 board. Standard Models Vacuum Sensor Kits are available in a variety Veeder-Root P/N Description of models: 330020-467 4 Vacuum Sensor Kit*for steel tank 330020-468,-469,-470,-471 4 Vacuum Sensor Kit for fiberglass tanks(4',6',8',10') 330020-486 4 Vacuum Sensor Kit*for no tank • For monitoring double-walled piping 330020-472 3 Vacuum Sensor Kit*for steel tank 330020-473,-474,-475,-476 3 Vacuum Sensor Kit*for fiberglass tanks(4',6%8',10.) and sump interstices 330020-485 3 Vacuum Sensor Klt*for no tank • For monitoring double-walled steel tank 330020-479 2 Vacuum Sensor Kit*for steel tank interstices (see back page) 330020-481,-482,483,484 2 Vacuum Sensor Kit*for fiberglass tanks(4',6',8',10.) 330020-480 2 Vacuum Sensor Kit*for no tank • For double-walled fiberglass tanks 330020-495 1 Vacuum Sensor Kit*for no tank 857280-100 Vacuum Sensor for piping&sumps These kits differ in the number of vacuum 857280-200 Vacuum Sensor for steel tanks 857280-301,-302,-303,304 Vacuum Sensor for fiberglass tanks (4',6',8',10') sensors and the configuration of associated 330020-448 Mounting Kit liquid sensors. An inline kit mounted liquid 332217-001 Relief Valve Assembly sensor is used for Vacuum Sensors 332250-001 Smart Sensor w/Embedded Pressure Sensor Module(7 Channel)** monitoring piping and sumps. An external Accessories Part Description Quantity/Length Part Number liquid sensor (to be installed in the secondary 1/4" NPT Barbed Fittings 3 330020-48 q ry 1/4" NPT Barbed Fittings 15 330020-488 space at the bottom of the tank) is provided 1/4" NPT Barbed Fittings 25 330020-489 657 with one of the Vacuum Sensors in the steel Barbed Tee 1 332310-001 Vacuum Hose 25' 25' 332310-001 and fiberglass tank kits to monitor the tank. Vacuum Hose 50' 50, 332310-002 Vacuum Hose 100' 100, 332310-003 3-Way Ball Valve 1 576008-649 Schrader Valve Barbed Fitting 3 330020-496 Schrader Valve Barbed Fitting 15 330020-497 Kits include mounting bracket,6'of vacuum hose,relief valve assembly(if required)and the appropriate number of liquid sensors, 3-way ball valves, barbed fittings and hose clamps so that each vacuum sensor can monitor a single tank,sump or piping interstices. The Vacuum Sensing System requires one 7 channel Smart Sensor Interface vnth Embedded Pressure Module,8 channel Smart Sensor Modules(p/n 329356-004)can be used for Vacuum Sensors eight and above. For more information call: 1-888-561-7942 VEEDER-ROOT