COMPLIANCE INFO_2025 - Laserfiche WebLink

Home Browse Search

<aIIen.asio@sigov.org> Subject: 7000 Michael Canlis-Tank Lining information Good afternoon, I've found some additional information on tank lining that might help you in creating the permit approval packet for submittal. The State Water Resources Control Board has LG 136fortank lining. Here is the link I found on Google: https://www.waterboards.ca.gov/ust/leak prevention/Igs/136_1.shtml This guidance document includes an example plan check fortank lining. I've copied it below so you'll have manyof the questions that will need to be answered for the tank lining permit. Please let me know if you have any questions. EXAMPLE PLAN CHECK FOR TANK LINING 1. Obtain a complete third-party evaluation of the lining material and procedures: a. A resume, including all applicable formal training experience, from personnel who conducted the evaluation (not necessary for Underwriters Laboratories). b. An affidavit from the company that received the third-party evaluation confirming that there are no mutual financial interests between lining company and testing organization (not necessary for Underwriters Laboratories). c. A description of the testing organization's formal periodic inspections of the listed/certified materials and processes. (The purpose of the formal periodic inspections is to ensure that the listed/certified materials and process continue to comply with the listing/certification.) d. A copy of the voluntary consensus standard that was used during the evaluation or a description of the equivalent test protocol, if a voluntary consensus standard was not used. e. The testing organization's raw field data, laboratory results, calculations, graphs, charts, etc. f. The conclusion of the testing organization's evaluation of the lining material. g. The conclusion of the testing organization's evaluation of the lining process. h. Limitations on the listing/certification, if any. i. A statement from the testing organization confirming that all equipment at the test site(s)was properly maintained and calibrated to the level of accuracy necessary for a valid evaluation. j. A statement from the lining applicator confirming that the materials that will be used are the same materials that were evaluated by the testing organization. k. A statement from the lining applicator confirming that the processes that will be used are the same processes that were evaluated by the testing organization. I. A description of tank lining processes to be used by the applicator. m. A statement from the company that received the evaluation describing training provided to the authorized applicator. 2. Does lining applicator have one of the following valid, unexpired contractors licenses: • General Engineering Contractor(A) • General Building Contractor (B) • Limited Specialty/Service Station Maintenance (C-61/D40) • Limited Specialty/Synthetic Products (C-61012) 2