Laserfiche WebLink
STEP 13: DIIMPU F1FtST HOLE STIEP IS: DtMP LE REMAINING HOLD <br /> Remove tool, Remove any chips or burrs from ttke drill- Remove any ch Ips Dr burrs(torn the drib+)opera bn. <br /> ing operation. Place the assem bly on a solid surface. N mole the next( )Moles as done in Step 13. Make su re <br /> Using the punch suppliied v6th the 71 SO-TOOL, 71 St the assembly Is on a solid surface when punchi rxg- Aftef <br /> T0(XC,and 71SO-TOOLCf, align the tip of the pund3 punching,irenv"any chips that may haw fallen into <br /> with t dnokd hak and dimple tiles upp& drop tube by the 0m tube snow hole. <br /> striking the punch with a hammer until thedrop tube is <br /> formed inw countersunk hole in the inlet tube. After <br /> purdhing, Gemoveany eh'ps that may have fallen into <br /> the ink-t tube screw hafe. <br /> Align punch with <br /> drilled hole <br /> Figure 15 <br /> * STEP 16: ASSEMBLE OTHER SCAEM <br /> Apply black molt'grease to screws arxd tighten the oth- <br /> er(2)screws into in let-tube with a screwddwr as done <br /> Fr`9VM 73 In Step 1 it. Use only the Mpbte screws that are supplied <br /> +rwizh Lhe ynm Searing torque Is 20 in Abs rnim to 35 in.- <br /> STEP <br /> nSTEP 14: ASSEMBLE IFI RST SCREW lbs max, DD not over Vghte ri. <br /> Ensure that the drop tube was farmed Into the couu rGter- <br /> sunk screw hole as shown In Figure 14 If rpt return to STIP 17: APPLY GREASE TO LOWER D-#iMG AND <br /> Step 13. Apply black maly grease to screw and irighterw BOGY TIHREADS <br /> first v-rew into Inlet tuts o4th a screwdriver. Use only Apply black molt'grease to the lower tube o-ring and <br /> the taptite screws that are supplied with d,e unit Seat- body threads as shown. Ntapke sura coverage i5 corm <br /> ir,9 torque Is 2O in-ibs min.to 3S in-lbs max- Screw head pletely around the o-ring. IraUll a-ring in gnxhe just <br /> should be flush with tf'we drop tube, Vo not over tlght- ab['w threads, <br /> en. <br /> Apph►grease <br /> } aroLkrd o-ring <br /> Yom_ <br /> G*�w�amn«bra�..µiao <br /> O ir+g <br /> groove $4dyr}-mads <br /> Figum 17 <br />