Laserfiche WebLink
E.O. VR-203/204 <br /> Veeder-Root Vapor Polisher Hydrocarbon Emissions Test Form <br /> Permit Number:N-633 DATE 6/13/25 Test Company:NOR-CAL TANK TESTING <br /> Site Name: PERSHING GAS FOR LESS Technician:DAVID WINKLER <br /> Site Address: 4445 N PERSHING Certification Number Expiration Datc <br /> City: STOCKTON CA District: SJV 0082 3/31/26 <br /> V ST: 0774 10/16/24 <br /> Veeder-Root:B34975 7/20/24 <br /> Pre-Test Parameters Test Result <br /> Was the vapor polisher load<80%? YES <br /> Was Exhibit 11 conducted and passed? YES <br /> HYDROCARBON ANALYZER CALIBRATION CHECK <br /> Hydrocarbon analyzer zero check reading 0 <br /> Hydrocarbon analyzer calibration check reading 9000 <br /> Is the zero check reading<0.1%by volume? YES <br /> Is the calibration check reading between 0.8%and 1.0%by volume? YES <br /> HYDROCARBON EMISSIONS TEST <br /> Starting inlet test gas flow rate(scfh) 15 <br /> Ending inlet test gas flow rate(scfh) 15 <br /> Hydrocarbon reading at 3 minutes(ppmv) 0 <br /> Hydrocarbon reading at 4 minutes(ppmv) 0 <br /> Hydrocarbon reading at 5 minutes(ppmv) 0 <br /> Hydrocarbon reading at 6 minutes(ppmv) 0 <br /> Is the hydrocarbon concentration<9000 ppmv for all readings? YES <br /> NOTES: 'The hydrocarbon concentration must be less than 9000 ppmv for all readings otherwise the vapor polisher is not <br /> in compliance. <br /> 2Three-way valve must be returned to normal(open)operating position after testing is completed. <br /> 'The PMC vapor mode must be reset to automatic after testing is completed. <br /> I declare, under penalty of perjury under the laws of the state of California that based on information and belief formed <br /> after reasonable inquiry, the statements and information provided in this document are true, accurate, and complete. <br /> Signature of Technician: Date: 6/13/25 <br /> Ver. 1.3—09.25.18 <br />