Laserfiche WebLink
Job Inputs <br />Job Name Jobname "Rotten Robbie #69" <br />Tank Information Tanksize "10ft Dia 12M DW Tank 17366-001.DWG"() <br />Location Tanklocation "1014 S. Airport Way, Manteca, CA 95337" <br />Date Prepared Dateprepared "09/07/2023" <br />Number of Tanks Number tanks "One" <br />Unit Weights <br />Water wat 62.42 pcf <br />used to calculate material weights. do not change <br />Fluid Around Tank tk_wat 62.42 pcf <br />used to calculate buoyannt forces. Normally at <br />4degC is 62.424 pcf for water (1g/cc). For salt <br />water use 64.0 pcf. <br />Submerged <br />Material Dry Soil Wt Saturated Wt <br />pea gravel 100 pcf 57.6 pcf <br />sand/crushed stone 120 pcf 74.8 pcf <br />light material 85 pcf 39.8 pcf <br />Backfill Dry Weight fill 100pcf <br />Submerged Backfill sub_fill 57.6 pcf <br />If desired, an alternate backfill material is allowed above the tank top separated from the tank backfill <br />material by a layer of filter fabric. <br />Alternate Backfill Dry <br />Weight alt_fill fill 100.0 pcf If an alternate backfill will be used, <br />enter the values for the alternate <br />backfill material. Otherwise set <br />equal to the tank backfill values. <br />sub_alt_fill sub_fill 57.6 pcf Alternate Backfill <br />Submerged Weight <br />BackfillNote "Over tank backfill same as tank backfill"alt_fill fill= sub_alt_fill sub_fill= if <br />"Alternate backfill is used over the tank top" otherwise <br />Concrete conc 150 pcf <br />Submerged Concrete sub_conc conc tk_wat sub_conc 87.6 pcf <br />Brine Specific Gravity Brinesg 1.3 specific gravity of the annular space fluid if the tank has a <br />wet annular space. Use 1.3 for Brine. <br />Tank Wall <br />Specific Gravity <br />Wallsg 1.3 specific gravity of the tank wall laminate. 1.3 can be <br />considered to be a lower bound for FGS laminate <br />Tank Buoyancy, Rotten Robbie No 69, <br />Manteca CA, dwg 17366-001, 10ft DWT <br />Date Printed: 9/7/2023 Page 6 of 46