Laserfiche WebLink
5. Job Hazard Evaluation <br /> Roux's work at the Site is expected to entail a variety of physical, chemical, and biological hazards, all of <br /> which must be sufficiently managed to allow the work to be performed safely. Some of the hazards are <br /> Site-specific (i.e., they are associated with the nature, physical characteristics, and/or routine operation of <br /> the Site itself), while others are activity-specific (i.e., they are associated with [or arise from] the particular <br /> activity being performed). The various hazards can be grouped into the following categories: <br /> • Caught/Crushed—the potential to become caught in, under, between, or by an object or parts of an <br /> object, such as equipment with parts that open and close or move up and down ("pinch points") or <br /> equipment that rotates, and the accompanying potential to have body parts cut, mangled, or crushed <br /> thereby. <br /> • Contact — the potential to be struck by or against moving or stationary objects that can cause <br /> physical injury, such as heavy machinery, overhead piping, moving vehicles, falling objects, and <br /> equipment(including tools and hand-held equipment)or infrastructure with the ability to cut or impale. <br /> • Energy Sources — the potential for bodily harm associated with energy sources, most notably <br /> electricity, but also including latent energy sources such as compressed air and equipment under <br /> tension (which when released could cause injurious contact or a fall). <br /> • Ergonomics — the potential for musculoskeletal injury associated with lifting/carrying, <br /> pushing/pulling, bending, reaching, and other physical activity attributable to poor body <br /> position/mechanics, repetitive motion, and/or vibration. <br /> • Exposure—the potential for injury/illness due to physical,chemical, or biological exposures in the work <br /> environment, including but not limited to temperature extremes, solar radiation, and noise (physical), <br /> chemical splashes and hazardous atmospheres (chemical), and animal/insect bites and poisonous <br /> plants(biological). <br /> • Falls —the potential to slip or trip and thus fall or drop a load, resulting in bodily injury to oneself or <br /> others. <br /> The foregoing is intended to provide Roux employees with a general awareness of the hazards involved with <br /> Site work. A more detailed review of the potential hazards associated with each specific activity planned for the <br /> Site(or ongoing activity,as the case may be)is provided in the activity-specific Job Safety Analysis(JSA)forms <br /> in Appendix A. As can be seen in the JSA forms, the hazards are identified per the above categories, and <br /> specific measures designed to mitigate/manage those hazards are also identified. In preparing the JSAforms, <br /> all categories of hazards were considered, and all anticipated potential hazards were identified to the extent <br /> possible based on the experience of the personnel preparing and reviewing the JSA forms. However, there is <br /> always the possibility for an unanticipated hazard to arise, potentially as conditions change over the course of <br /> the workday. Roux personnel must maintain a continual awareness of potential hazards in the work zone, <br /> regardless of whether or not the hazard is identified in the attached JSA forms. JSAs shall be reviewed and <br /> updated periodically with any changing conditions or changes in previously anticipated Site work requirements. <br /> Particular attention should be paid to hazards associated with exposure to hazardous substances(see Table 1 <br /> for a listing of the hazardous substances most likely to be encountered in environmental media at the Site)and <br /> to Site personnel being located "in the line of fire" with respect to moving equipment, pinch points, and latent <br /> energy (e.g., being located or having body parts located within the swing radius of an excavator, between two <br /> sections of pipe being connected, below a piece of suspended equipment, or adjacent to a compressed air <br /> line). <br /> 5175.0001S102/HSP Site-Specific Health and Safety Plan I ROUX 112 <br />