Laserfiche WebLink
Revised: 02/03/2023 7 <br />Job Steps Hazards Actions to Eliminate or Minimize Hazards RAC <br />10. C) Driving Sheet Pile with <br />Vibratory Hammer <br />- Falling Objects <br />- Heavy equipment hazards could be <br />present <br />- Lifting equipment (cranes) <br />- Line-of-Fire <br />- Moving parts of crane <br />- Personal Injury <br />- Struck by Falling Load <br />- Suspended load <br />1. Stay clear of suspended load. Do not stand underneath <br />2. Stay out of crane "Swing Zone" <br />3. Use hearing protection. If noise is greater than 95dbs, use <br />double protection (ear muffs) <br />L <br />11. Inspection of critical crane <br />parts <br />- Faulty Equipment <br />- Heavy equipment hazards could be <br />present <br />- Moving parts of crane <br />- Personal Injury <br />- Slips/Trips/Falls <br />- Unqualified Operator <br />1. If area to be inspected on crane is over 6 feet, Fall Protection <br />must be worn and properly tied off <br />2. Three-Point contact while climbing (On/Off) <br />3. Keep hands, arms and feet away from moving parts <br />L <br />NC-25-1137 Tiwana & Sons <br />1210 East Hammer Lane, Stockton, CA 95210