Laserfiche WebLink
Application Amounts of HOLEPLUG *Graded Sodium Bentonite Required for <br /> Amounts Plugging Applications <br /> Hole Pounds Feet Filled by Bags <br /> Hole Diameter HOLEPLUG One Bag HOLEPLUG <br /> Volume bentonite HOLEPLUG bentonite <br /> (inches) (ft3/ft) Needed to Fill bentonite Needed to Fill <br /> One Foot 100 ft <br /> 2 0.022 1.6 32.6 3.2 <br /> 2.5 0.034 2.4 20.5 5.0 <br /> 3 0.049 3.5 14.3 7.0 <br /> 3.5 0.067 4.8 10.4 9.6 <br /> 4 0.087 6.3 7.9 12.6 <br /> 4.5 0.110 7.9 6.3 15.8 <br /> 5 0.136 9.8 5.1 19.6 <br /> 5.5 0.165 11.9 4.2 23.8 <br /> 6 0.196 14.1 3.5 28.2 <br /> 6.5 0.230 16.6 3.0 33.2 <br /> 7 0.267 19.2 2.6 38.4 <br /> 7.5 0.307 22.1 2.3 44.2 <br /> 8 0.349 25.1 2.0 50.2 <br /> 8.5 0.394 28.4 1.8 56.8 <br /> 9 0.442 31.8 1.6 63.6 <br /> 9.5 0.492 35.4 1.4 70.8 <br /> 10 0.545 39.2 1.3 78.4 <br /> 11 0.660 47.5 1.1 95.0 <br /> 12 0.785 56.5 0.89 113.0 <br /> 15 1.227 88.3 0.57 176.6 <br /> 18 1.767 127.2 0.39 254.4 <br /> 20 2.182 157.1 0.32 314.2 <br /> 25 3.409 245.4 0.20 490.8 <br /> 30 4.909 353.4 0.14 706.8 <br /> 'The above calculations and resultant volumes of material required assume a gauge bore hole and are based on the use <br /> of HOLEPLUG 3/8"sodium bentonite where the average bulk density per bag is 0.7 ft3/50-lb bag.Required material <br /> volumes for HOLEPLUG 314"will differ slightly for the same size bore hole.In the event that questions arise or further <br /> information is needed,please contact your local Baroid IDP Representative for assistance <br />