WORK PLANS - Laserfiche WebLink

Home Browse Search

Pre-existing upper respiratory and lung diseases. Section 4-FIRST AID Eves Immediately flush eyes thoroughly with water. Continue flushing eye for at least 15 minutes,including under lids,to remove all particles. Call physician if irritation persists or later develops. Skin Wash skin with cool water and pH-neutral soap or a mild detergent. Seek medical treatment if irritation persists or later develops. Inhalation of Airborne Dust Remove to fresh air. Seek medical help if coughing and other symptoms do not subside. Ingestion Do not induce vomiting. If conscious,have the victim drink plenty of water and call a physician immediately. Section 5-FIRE AND EXPLOSION DATA Flash point...................................None Lower Explosive Limit........................None Upper Explosive Limit.................None Auto ignition temperature....................Not Combustible Extinguishing media.....................Not Combustible Special fire fighting Procedures...........None Hazardous combustion products..None Unusual fire and explosion hazards.....None Section 6-ACCIDENTAL RELEASE MEASURES Collect dry material using a scoop.Avoid actions that cause dust to become airborne. Avoid inhalation of dust and contact with skin. Wetting of spilled materials may be beneficial to minimize generation of airborne dusts. None of the components of this product are subject to the reporting requirements of Title III of SARA 1986, and 40 CFR 372. Section 7-HANDLING AND STORAGE Follow the personal protection and controls set forth in Section 8 of this MSDS when handling this product.Respirable crystalline silica-containing dust may be generated during processing,handling and storage. Section 8-EXPOSURE CONTROLS/PERSONAL PROTECTION Skin Protection Wash dust-exposed skin with soap and water before eating,drinking,smoking,and using the toilet facilities.Wash work cloths after each use. Respiratory Protection Avoid actions that cause dust to become airborne. Use local or general exhaust ventilation to control exposures below applicable exposure limits. Use NIOSH/MSHA approved(under 30 CFR 11)or NIOSH approved(under 42 CFR 84)respirators in poorly ventilated areas,if an applicable exposure limit is exceeded,or when dust causes discomfort or irritation.(Advisory:Respirators and filters purchased after June 10, 1998 must be certified under 42 CFR 84.) Ventilation Use local exhaust or general dilution ventilation to control exposure within applicable limits. Eve Protection Safety glasses with side shields should be worn as minimum protection. In extremely dusty environments and unpredictable environments wear unvented or indirectly vented goggles to avoid eye irritation or injury. Contact lenses should not be worn when working with products which may generate airborne dust.