Laserfiche WebLink
Form 1 <br />Sampling Event Visual Observations and Analytical Results <br /> <br /> <br />Form 1 – Page 2 of 2 <br /> <br />Outfall Analytical Testing: <br />Outfall Name pH (field) <br />Qualified for <br />Representative <br />Sampling <br />Reduction? <br />(Yes / No) <br />Qualified <br />Combined <br />Sample? <br />(Yes / No) <br />Qualified for <br />Sampling <br />Frequency <br />Reduction? <br />(Yes / No) <br />Input below the laboratory analytical result when obtained: Date <br />submitted <br />on <br />SMARTS <br />Likely pollutant <br />source <br />Total <br />suspended <br />solids <br />Oil & <br />grease <br />SW-3 No No No <br />SW-4 No No No <br /> <br /> <br />Method of pH <br />analysis: Units of measurement: <br />Laboratory method used: <br />Method detection limit: <br />NALs: < 6.0 & > 9.0 Note: Enter NALs for other required analytes per Table 2 of <br />the General Permit. <br />Annual NAL: <br />100 mg/L <br />Instant: <br />400 mg/L <br />Annual NAL: <br />15 mg/L <br />Instant: <br />25 mg/L <br /> <br /> <br />Corrective Action Based on Analytical Results: <br />Based on the analytical results of the storm water testing, summarize corrective action needed or taken in the box below. Note if any instantaneous NALs were exceeded. Also, <br />note if any annual NALs are in jeopardy of being exceeded. <br /> <br />Don’t forget to submit all sample results on SMARTS within 30 days of receiving them. <br />