Laserfiche WebLink
• When two or more pieces of equipment will be working in a confined area for a period of <br /> 30 minutes or more, the area is cordoned off and personnel working on the tipping floor <br /> will be instructed to maintain a distance of 75 ft to 100 ft. <br /> The size-reduction equipment and the backhoe are operated an average of three hours daily <br /> while the loaders are operated an average of seven hours daily. When the size-reduction <br /> equipment, backhoe and the two loaders are operated simultaneously, equipment operators and <br /> other staff on the tipping floor are made aware that all four pieces of equipment are operating on <br /> the tipping floor, and maintain a distance of 15 to 20 ft from each other. Also, equipment <br /> operators make use of the horn on the equipment to make personnel aware of their presence. <br /> 2.7 LOADING TRANSFER VEHICLES <br /> Transfer trucks enter the site and proceed to the ramp at the rear of the MRF, which allows the <br /> trucks to park below the loading chute (Figure 2). The transfer trucks are loaded with solid waste <br /> through the chute. During loading, the vehicle weight is monitored using a platform scale at the <br /> bottom of the transfer chute, allowing the trailer to be filled to the maximum allowed weight. <br /> Once the trailer is loaded, it leaves the tunnel and exits the facility via the gate (Figure 6). <br /> 2.8 Provisions for Peak Loading <br /> Peak traffic periods will be accommodated by the following adjustments: <br /> 1. Opening a second cashier window at the scale house <br /> 2. Placing additional traffic directors to direct traffic. <br /> 3. Involving all equipment on site and operators to aid in the processing of incoming refuse. <br /> 4. Accumulating refuse and materials within the MRF until peak loading conditions are <br /> passed. The storage capacity within the MRF is approximately 8,200 CY. <br /> 5. Increasing the transfer rate of refuse to the disposal facility if the storage capacity inside <br /> the MRF nears maximum storage capacity. Additional transfer vehicles and drivers will <br /> Lovelace MRF and Transfer Station Department of Public Works/Solid Waste Division <br /> Transfer Processing Report 19 County of San Joaquin <br /> April 16,2026 <br />