Laserfiche WebLink
Product code 00389014 Date of issue 20 May 2026 Version 1.61 <br /> Product name 96-2000 PPG FORMULA PRO COLORANT CONCENTRATE BX LAMP BLACK <br /> Section 6. Accidental release measures <br /> Personal precautions, protective equipment and emergency procedures <br /> For non-emergency No action shall be taken involving any personal risk or without suitable training. <br /> personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from <br /> entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist. <br /> Provide adequate ventilation. Wear appropriate respirator when ventilation is <br /> inadequate. Put on appropriate personal protective equipment. <br /> For emergency responders If specialized clothing is required to deal with the spillage, take note of any information in <br /> Section 8 on suitable and unsuitable materials. See also the information in "For non- <br /> emergency personnel'. <br /> Environmental precautions Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains <br /> and sewers. Inform the relevant authorities if the product has caused environmental <br /> pollution (sewers, waterways, soil or air). <br /> Methods and materials for containment and cleaning up <br /> Small spill Stop leak if without risk. Move containers from spill area. Dilute with water and mop up <br /> if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and <br /> place in an appropriate waste disposal container. Dispose of via a licensed waste <br /> disposal contractor. <br /> Large spill Stop leak if without risk. Move containers from spill area. Approach release from <br /> upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash <br /> spillages into an effluent treatment plant or proceed as follows. Contain and collect <br /> spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or <br /> diatomaceous earth and place in container for disposal according to local regulations <br /> (see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated <br /> absorbent material may pose the same hazard as the spilled product. Note: see <br /> Section 1 for emergency contact information and Section 13 for waste disposal. <br /> Section 7. Handling and storage <br /> Precautions for safe handling <br /> Protective measures Put on appropriate personal protective equipment (see Section 8). Avoid exposure- <br /> obtain special instructions before use. Do not handle until all safety precautions have <br /> been read and understood. Do not get in eyes or on skin or clothing. Do not ingest. <br /> Avoid breathing vapor or mist. If during normal use the material presents a respiratory <br /> hazard, use only with adequate ventilation or wear appropriate respirator. Keep in the <br /> original container or an approved alternative made from a compatible material, kept <br /> tightly closed when not in use. Empty containers retain product residue and can be <br /> hazardous. Do not reuse container. <br /> Special precautions If this material is part of a multiple component system, read the Safety Data Sheet(s)for <br /> the other component or components before blending as the resulting mixture may have <br /> the hazards of all of its parts. <br /> Advice on general Eating, drinking and smoking should be prohibited in areas where this material is <br /> occupational hygiene handled, stored and processed. Workers should wash hands and face before eating, <br /> drinking and smoking. Remove contaminated clothing and protective equipment before <br /> entering eating areas. See also Section 8 for additional information on hygiene <br /> measures. <br /> United States Page: 5/16 <br />