Laserfiche WebLink
Exhibit B - Item 22 - Epoxy flooring system <br />Woridwid* Offices: <br />800.257.7953 <br />(905)430.3333 <br />(32)2.720.8982 <br />(971)4.3470460 <br />(27)11.254.5500 <br />(86)21.5466.5118 <br />SUBSTRATE <br />Stonclad GS, with the appropriate primer, is suitable for applica­ <br />tion over concrete, wood, brick, quarry tile, metal or Stonhard <br />Stonset grouts. For questions regarding other possible sub­ <br />strates or an appropriate primer, contact your local Stonhard <br />representative or Technical Service. <br />Europe <br />Middle East <br />Africa <br />Asia <br />PRIMING <br />The use of Standard Primer is necessary for all applications of <br />Stonclad GS over all substrates except Stonset grouts. Over <br />Stonset grouts. Stonhard's Stonset Primer is used. Please see the <br />appropriate primer Product Data sheet for details. <br />APPLYING <br />• DO NOT attempt to install material if the temperature of <br />Stonclad GS components and substrate are not within 60 to <br />85°F/I6 to SO’C-The cure time and application properties of <br />the material are severely affected at temperatures outside of <br />this range. <br />• Material must be applied immediately after mixing. <br />• A suitable screed applicator is used to distribute the mixed <br />Stonclad GS onto the floor <br />• Steel finishing trowels are used to compact and smooth the <br />surface of the material to the required thickness. <br />• Detailed application instructions can be found in the <br />Stonclad GS Directions. <br />SUBSTRATE PREPARATION <br />Proper preparation is critical to ensure an adequate bond and <br />system performance.The substrate must be dry and properly <br />prepared utilizing mechanical methods. Questions regarding <br />substrate preparation should be directed to your local Stonhard <br />representative or Technical Service. <br />MIXING <br />• Proper mixing is critical for the product to exhibit the prop­ <br />er application properties, cure properties and ultimate physi­ <br />cal properties. <br />• Mechanical mixing using a JB Blender (or equivalent 5 gal. pail <br />mixer) or a larger mortar mixer (e.g., a Baugh 3 Batch Mixer) <br />is required. <br />• See Stonclad GS Directions for further details. <br />USA <br />Canada <br />NOTES <br />• Procedures for cleaning of the flooring system during opera­ <br />tions can be found in the Stonhard Floor Maintenance Guide. <br />• Specific information regarding chemical resistance is available <br />in the Stonclad Chemical Resistance Guide. If a coating is uti­ <br />lized to seal the Stonclad GS surface, please ensure that you <br />consult the Product Data sheet for the coating for details <br />regarding chemical resistance of the coating utilized. <br />• Safety Data Sheets for Stonclad GS are available online at <br />www.stonhard.com under Products or upon request <br />• A staff of technical service engineers is available to assist with <br />installation or to answer questions related to Stonhard prod­ <br />ucts. <br />• Requests for literature can be made through local sales repre­ <br />sentatives and offices, or corpoi'ate offices located worldwide. <br />• The appearance of all floor, wall and lining systems will change <br />over time due to normal wean abrasion, traffic and cleaning. <br />Generally, high gloss coatings are subject to a reduction in <br />gloss, while matte finish coatings can increase in gloss level <br />under normal operating conditions. <br />• Surface texture of resinous flooring surfaces can change over <br />time as a result of wear and surface contaminants. Surfaces <br />should be cleaned regularly and deep cleaned periodically to <br />ensure no contaminant buildup occurs. Surfaces should be <br />periodically inspected to ensure they are performing as <br />expected and may require traction-enhancing maintenance to <br />ensure they continue to meet expectations for the particular <br />area and conditions of use. <br />IMPORTANT: <br />Stonhard bolioves the Information contained here to be true and accurate as of the date ol publication. Stonhard makes no warranty, expressed or Implied, based on this literature and assumes no responsibility for conse­ <br />quential or incidental damages In the use ol the systems described. Including any warranty ol merchantability or fitness. Information contained here Is for evaluation only. We further reserve the right to modify and change <br />products or literature at any time and without prior notice. <br />Ha Zjk STONHARD' <br />tSf www.stonhard.com <br />Mexico (52)55.9140.4500 <br />South America (54-3327)44.2222