WORK PLANS_2025 - Laserfiche WebLink

Home Browse Search

TEST REPORT | Requested By:Stuart Bartenfield GOOD: TESTING METHODS REQUESTED: DEVIATION FROM TEST METHOD: This test procedure measures slip resistance as it relates to human locomotion.TEST OVERVIEW: TEST DATA: > > Approval: Erie Miles, III. Lab Director Testing Services, Inc It is generally recognized that a walking surface must have a static coefficient of friction greater than 0.5 to be considered slip resistant, the above specified product meets this requirement when tested according to ASTM D2047 with dry leather soles. Under NVLAP guidelines, TSi is to report any outsourcing of testing to another laboratory facility. In the above testing, some/all of tests were outsourced to: ABIC Testing Laboratories, Inc., Fairfield, NJ. Their accreditations are on file and available upon request. Three specimens were used, obtaining four readings from each specimen. The specimens were rotated 90° between each of the four readings so that a fresh surface is tested each time and directional effects, if any, are cancelled. A total of 12 pulls over a dry surface using leather. The results below indicated the Ibs/force necessary to initiate sliding (slippage). PO Box 2041 Dalton, GA 30722-2041 (706) 226-1400 tsioffice(q)optilink.us TESTING SERVICES ------------------------ I MC------------------------- CLIENT: Company: Address: Pull Al Pull Bl Pull Cl 0.75 0.70 0.75 HZ State reason for any Deviation from, Additions to, or Exclusions From Test Method. None Pull A2_______ Pull B2 Pull C2_______ “0.8 SCOF 0.77 0.78 0.70 Report Number:_____ Lab Test Number: Test Completion Date: Report Date:_______ Page: Pull A3 Pull B3 Pull C3 I 0.78 0.70 0.77 73888E-01 3009-6211 5/21/2018 5/22/2018 1 of 1 0.76 0.73 0.75 Patcraft_______ PO Drawer 2128 Dalton. GA 30722 | DateReceived: | 4/20/2018 POOR: | | REJECTED: | Pull A4 Pull B4_______ Pull C4_______ Meets the Specification: £ SCOF 0,5 TEST MATERIAL: Material Type: Material Condition: Style # Style Name:_____ Size:_________ Test# SAMPLING PLAN:________ _________________________________________________________________ Sampling Date: | 4/20/2018 • Specimen sampling is performed in the sampling department at TSI. • The sampling size of specimens is determined by the test method requirements. • In the event a specific samoling size is not called for, a determination will be made based on previous testing experience, and approved for use by an authorized manager. • All samples are subjected to the outside environmental conditions of temperature and relative humidly. « Sample requiring pre-determined exposure to specified environmental conditions based on a specific test method, lake place in lhe departments in which they are tested Resilient Flooring —EXCELLENT: 1466V____________ Splitwood 9" x 60’' R-180419-48786 __________________________________Testing Services, Inc was instructed by the client to perform the following testing__________________________________ Standard: | ASTM D2047 | Test Method: | Standard Test Method for Static Coefficient of Friction of Polished Flooring Surfaces as Measured by the James Machine CU1» DIM*•« Specimen A Specimen B Specimen C Average: Leather Dry Surface OUR LETTERS AND REPORTS APPLY ONLY TO THE SAMPLE TESTED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY I IDENTICAL OR SIMILAR PRODUCTS. THESE LETTERS AND REPORTS ARE FOR THE USE ONLY OF THE CLIENT TO WHOM THEY ARE ADDRESSED AND I THEIR COMMUNICATION TO ANY OTHERS OR THE USE OF THE NAME TESTING SERVICES, INC. MUST RECEIVE OUR PRIOR WRITTEN APPROVAL. I OUR REPORTS, LETTERS, NAME, SEALS. OR INSIGNIA ARE NOT UNDER ANY CIRCUMSTANCES TO BE USED IN ADVERTISING TO THE GENERAL PUBLIC. I