Laserfiche WebLink
be corrected by the Contractor at his cost and retested prior to final acceptance. <br /> All retesting shall be at the Contractor's expense. Contractor shall submit the test <br /> results to the City/District for review and approval. -- <br /> SECTION 15100 — PIPING SYSTEMS <br /> PART 1 — GENERAL <br /> 1.01 DESCRIPTION OF WORK — <br /> This section covers all work necessary to furnish, install, and test all piping systems, including <br /> exposed piping and buried piping, as shown on the Drawings and as specified herein. <br /> 1.02 SUBMITTALS <br /> Submittals shall be in accordance with Section 01300 and shall demonstrate full compliance _ <br /> with all aspects of this specification, and shall include, but not be limited to, complete <br /> manufacturers' data on all pipe material, fittings, and coatings. <br /> A. Shop Fabricated Piping <br /> Detailed pipe fabrication drawings showing special fittings and bends, dimensions, _ <br /> coatings, and other pertinent information. <br /> Layout drawing showing location of each pipe section and each special length; number <br /> or otherwise designate laying sequence on each piece. <br /> B. Pipe Wall Thickness: Identify wall thickness and rational method or standard <br /> applied to determine wall thickness for each size of each different service <br /> including exposed, submerged, buried, and concrete-encased installations for <br /> Contractor-designed piping. — <br /> Hydraulic Thrust Restraint for Restrained Joints: Details including materials, sizes, <br /> assembly ratings, and pipe attachment methods. <br /> C. Thrust Blocks: Concrete quantity, bearing area on pipe, and fitting joint locations. <br /> D. Dissimilar Buried Pipe Joints: Joint types and assembly drawings. <br /> 1.03 DESIGN REQUIREMENTS <br /> Where pipe diameter, thickness, pressure class, pressure rating, or thrust restraint is not shown <br /> or specified, design piping system in accordance with the following: <br /> A. Buried Piping: <br /> H2O-S16 traffic load with 1.5 impact factor, AASHTO Standard Specifications for <br /> Highway Bridges, as applicable. — <br /> Division III-147 NEI Phase II Water and Sewer <br /> July 2007 CIP Nos. 7468, 7589, 7590 <br />