Permits & Development - Encroachment(EP)/Driveway(DW) Permits - 2007_EP-07-301 thru EP-07-400_ - EP-07-352

Home Browse Search

made,the Department will be liable for interest on the amount withheld for the period of the withhold. The interest rate payable shall be 6 percent per annum. The Contractor shall notify the Engineer immediately upon request from the regulatory agencies to enter, inspect, sample,monitor, or otherwise access the project site or the Contractor's records pertaining to water pollution control work. The Contractor and the Department shall provide copies of correspondence, notices of violation, enforcement actions, or proposed fines by regulatory agencies to the requesting regulatory agency. SECTION 6. (BLANK) SECTION 7. (BLANK) SECTION 8. MATERIALS SECTION 8-1. MISCELLANEOUS 8-1.01 SUBSTITUTION OF NON-METRIC MATERIALS AND PRODUCTS Only materials and products conforming to the requirements of the specifications shall be incorporated in the work. When metric materials and products are not available, and when approved by the Engineer, and at no cost to the State, materials and products in the United States Standard Measures which are of equal quality and of the required properties and characteristics for the purpose intended,may be substituted for the equivalent metric materials and products, subject to the following provisions: A. Materials and products shown on the plans or in the special provisions as being equivalent may be substituted for the metric materials and products specified or detailed on the plans. B. Before other non-metric materials and products will be considered for use, the Contractor shall furnish, at the Contractor's expense, evidence satisfactory to the Engineer that the materials and products proposed for use are equal to or better than the materials and products specified or detailed on the plans. The burden of proof as to the quality and suitability of substitutions shall be upon the Contractor and the Contractor shall furnish necessary information as required by the Engineer. The Engineer will be the sole judge as to the quality and suitability of the substituted materials and products and the Engineer's decision will be final. C. When the Contractor elects to substitute non-metric materials and products,including materials and products shown on the plans or in the special provisions as being equivalent, the list of sources of material specified in Section 6- 1.01, "Source of Supply and Quality of Materials," of the Standard Specification shall include a list of substitutions to be made and contract items involved. In addition, for a change in design or details,the Contractor shall submit plans and working drawings in conformance with the provisions in Section 5-1.02, "Plans and Working Drawings," of the Standard Specifications. The plans and working drawings shall be submitted at least 7 days before the Contractor intends to begin the work involved. Unless otherwise specified,the following substitutions of materials and products will be allowed: Contract No. 10-OM7104 114