Laserfiche WebLink
Shore Pac GCV synthetic slurries shall be tested for conformance to the requirements shown in the following table: <br /> Shore Pac GCV <br /> CETCO Drilling Products Group <br /> PROPERTY RE 12 MENT TEST <br /> Density(kg/m3) <br /> Mud Weight <br /> -prior to final less than or equal to (Density) <br /> cleaning 1025* API13B-1 <br /> -just prior to Section 1 <br /> placing concrete <br /> Viscosity <br /> (seconds/liter) <br /> Marsh Funnel and <br /> -during drilling 35 to 78 Cup <br /> API 13B-1 <br /> Section 2.2 <br /> -prior to fmal less than or equal to <br /> cleaning 60 <br /> -just prior to <br /> placing concrete <br /> Glass Electrode pH <br /> H 8.0 to 11.0 Meter or pH Paper <br /> Sand Content <br /> (percent) Sand <br /> API 13B-1 <br /> -prior to final less than or equal to Section 5 <br /> cleaning 0.5 <br /> just prior to placing <br /> concrete <br /> *When approved by the Engineer, slurry may be used in salt <br /> water, and the allowable densities may be increased up to <br /> 32 kg/m3. <br /> ---Slurry temperature shall be at least 4°C when tested. <br /> Contract No. 10-OM7104 <br /> 162 <br />