COMPLIANCE INFO PRE 2019 - Laserfiche WebLink

Home Browse Search

SPCC for Antonini Enterprises Lathrop Facility AGT 15 is located in the Maintenance Shop Area (Figure 2). This tank is stored on a concrete surface and is not located in an area subject to potential flooding. Presently there is no double containment for this tank. The tank is inspected weekly for structural integrity and to ensure no leakage is occurring. The inspections are conducted and documented by the Maintenance Manager. A copy of the inspection form used is included in Appendix B and completed inspection forms are stored in the Safety Supervisors office with the SPCC. C. Facility Transfer Operations (112.7(e)(3)(i-v)): (i) Buried piping installation protection and examination: 112.7(e)(3) Facility transfer operations, pumping and in-plant process (onshore); (excluding production facilities). (i) Buried piping installations should have a protective wrapping and coating and should be cathodically protected if soil conditions warrant. If a section of buried line is exposed for any reason, it should be carefully examined for deterioration, If corrosion damage is found, additional examination and corrective action should be taken as indicated by the magnitude of the damage. There are no buried fuel pipelines present at this Facility. (ii) Not-in-service and standby service terminal connections: 112.7(e)(3) Facility transfer operations, pumping and in-plant process (onshore); (excluding production facilities). (ii) When a pipeline is not in service, or in standby service for an extended time, the terminal connection at the transfer point should be capped or blank-flanged, and marked as to origin. The tanks are in service throughout the year. The refueling line for AGT 1 is mounted within a 20-gallon spill collection box. In the event of a leak or improper hose connection during refueling activities, spilled fuel (up to 20-gallons) would be captured within the spill container box. The refueling line for AGT 1 is capped with the fill valve in a closed position when the AGT is not being refueled. The refueling line for AGT 2 is mounted to the top of AGT 2 and is housed within a 5- gallon cylindrical overflow box to capture any fuel spilled during refueling activities. The refueling line for AGT 2 is capped with the fill valve in a closed position when the AGT is not being refueled. (iii) Pipe supports design: 112.7(e)(3) Facility transfer operations, pumping and in-plant process (onshore); (excluding production facilities). (iii) Pipe supports should be properly designed to minimize abrasions and corrosion and allow for expansion and contraction. Pipes are constructed of welded steel and the influent and effluent pipes for AGT 1 and AGT 2 are all above-ground. The pipelines are secured to welded steel pipe support racks which are anchored to the concrete slab with appropriate base plates and anchor bolts. (iv)Aboveground valve and pipeline examination: 112.7(e)(3) Facility transfer operations, pumping and in-plant process (onshore); (excluding production facilities). (iv) All aboveground valves and pipelines should be subjected to regular examinations by operating personnel at which time the general condition of items, such as flange -16-