Laserfiche WebLink
Raising The Standard In <br />Overfill Prevention <br />From the company that brought you the <br />industry standard OPW 61 SO, OPW raises <br />the standard with the introduction of the <br />New 71SO Overfill Prevention Valve — <br />breakthrough innovation that takes overfill <br />prevention to a whole new level of <br />overfill perfection. <br />Eliminates curing issues, due to <br />hot or cold temperatures <br />e Easier, quicker, installation <br />a Higher qualify, <br />more reliable <br />installation <br />Lower costs <br />Greater protection <br />against fugitive <br />emissions and <br />pressure decay <br />Fastest flow rate in the industry <br />The new 71 SO is a two-stage, positive <br />shut-off valve, providing completely <br />automatic operation with no pre -checks <br />to perform, no resets, and no overrides <br />to be broken or abused. The valve closes <br />when the tank level rises to 95% capacity <br />and provides a special by-pass valve so <br />the tank can be filled to a maximum <br />capacity of 98%. The 71SO is available <br />for direct -bury and remote applications. <br />i Direct -Bury <br />Cii1 is Air <br />Resources BoaA <br />APPROVED <br />Remote -Fill \ <br />i <br />The OPW 71SO requires no epoxy sealants for installation. No sealants mean <br />the quality and reliability of the installation is significantly improved, promoting <br />the elimination of curing hassles during challenging applications, such as <br />extreme temperature conditions. No delays, no mess. EVR compliance is <br />assured with no time-consuming, expensive return visits to re -epoxy the valve. <br />NO EPDXY <br />— THE NEW 71SO ELIMINATES <br />THE MESS AND CURING <br />HASSLES OF EPDXY SEALANTS <br />THE NEVi EPDXY 71SO <br />PROVIDES FOR AN EASIER, <br />HIGHER QUALITY AND 10RE <br />RELIABLE INSTALLATION <br />California Air Resources Board <br />Phase I Vapor Recovery System <br />Certification (VR -102•H) <br />a The Only Vapor -Tight Overfill Valve In The Industry That Does Not <br />Require Messy, Time -Consuming Epoxy Sealants <br />e Robust Patent/Patent-Pending Design <br />• Reduces installation time and costs <br />• Improves quality of installation <br />e Special Patented And Patent -Pending Design Features Enable <br />Improved EVR Compliance By Eliminating 10 Of 17 Potential Leak Paths <br />• Typical valves have 17-25 potential leak paths <br />• Higher level of protection against fugitive emissions and pressure decay <br />• Improves EVR compliance assurance by 60% <br />• Reduces/eliminates future maintenance and/or valve replacement costs <br />