COMPLIANCE INFO_2015 - 2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 Page 3 of 3 5. UNDER -DISPENSER CONTAINMENT (UDC) TESTING Test Method Developed By: = UDC Manufacturer x Industry Standard ❑ Professional Engineer ❑ Other (Spec) Test Method Used: ❑ Pressure ❑ Vacuum x Hydrostatic ❑ Other (Specie) Test Equipment Used: Incon TS -STS UDC #1 Sat. UDC # 2/3 Sat iw Equipment Resolution:.001" UDC # UDC # UDC Manufacturer: Bravo Bravo UDC Material: FRP FRP UDC Depth: 30" 30" Height from UDC Bottom to Top of Highest Piping Penetration: 12" 12" Height from UDC Bottom to Lowest Electrical Penetration: 10" 10" Condition of UDC prior to testing: Clean Clean Portion of UDC Tested' 1/2 1/2 Does turbine shut down when UDC sensor detects liquid (both product and water)?' X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Turbine shutdown response time 3 sec 3 Sec. Is system programmed for fail- safe shutdown?' X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was fail-safe verified to be operational? X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA []Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Wait time between applying pressure/vacuum/water and starting test 15 min. 15 Min. Test Start Time: 1:52 1:52 Initial Reading (Ri): 2.811 1.634 Test End Time: 2:07 2:07 Final Reading (RF): 2.811 1.633 Test Duration: 15 Min 15 Min. Change in Reading (RF-Ri): 0 0.001 Pass/ Fail Threshold or Criteria: 0.002 0.002 Test Result: X Pass ❑ Fail X Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? X Yes ❑ No ❑ NA X Yes ❑ No ❑ NA ❑ Yes ❑ No ❑ NA ❑Yes ❑ No ❑ NA Comments — (include information on repairs made prior to testing, and recommended follow-up for failed tests) If the entire depth of the UDC is not tested, specify how much was tested. If the answer to any of the questions indicated with an asterisk (*) is "NO" or "NA", the entire UDC must be tested. (See SWRCB LG -160)