COMPLIANCE INFO_2015 - 2018 - Laserfiche WebLink

Home Browse Search

SWRCB, January 2002 8. PIPING RUMP TFCTiN(_ Page 4, of Test Method Developed By: Sump Manufacturer `vx Industry Standard n Professional Engineer Other (Specie) Test Method Used: Pressure Vacuum x Hydrostatic Other (Speck) Test Equipment Used:Incon is-sts Sump #Diesel Sump Equipment Resolution:.00I" Sump Sump Sump Diameter: 48" Sump Depth: 55" Sump Material: FRP Height from Tank Top to Top of Highest Piping Penetration: 38 Height from Tank Top to Lowest Electrical Penetration: 18" Condition of sump prior to testing: good Portion of Sump Tested' 1/2 Does turbine shut down when sump sensor detects liquid (both product and water)?* X Yes -_ No NA - L Yes -; No - NA J Yes No 7 -NA 11 Yes ❑ No ❑ NA Turbine shutdown response time 3 sec Is system programmed for fail-safe shutdown?* X Yes �, No NA Yes - No =: NA ❑ Yes ❑ No ❑ NA ❑ Yes ❑ No E NA Was fail-safe verified to be operational?* X Yes ^ No NA Yes No = NA Yes 71No NA ❑Yes No NA Wait time between applying pressure/vacuum/water and starting test: 15 min. Test Start Time: 11:39 Initial Reading (Rj): 5.378 Test End Time: 11:24 Final Reading (RF): 5.378 Test Duration: 15 min Change in Reading (RF -111): 0 Pass/Fail Threshold or Criteria: 0.002 Test Result: X Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass ❑ Fail Was sensor removed for testing? X Yes N❑l No El- Yes No NA ❑ Yes ❑ No [INA ❑ Yes ❑ No ❑ NA Was sensor properly replaced and verified functional after testing? X Yes E No ❑ NA 11 Yes - No NA ❑Yes ❑ No -_ NA ❑Yes El No U NA Comments - (itTclude information on repairs made prior to testing and recommended follow-up for failed tests) ' If the entire depth of the sump is not tested, specify how much was tested. If the answer to as of the questions indicated with an asterisk (*) is "NO" or "NA", the entire sump must be tested. (See SWRCB LG -160)