INSTALL 2003 - Laserfiche WebLink

Home Browse Search

Additional tools are open end and/or box end 1/2", Wank Sump Installation 9/16" and 3/4" wrenches. a rubber or plastic mallet, APT jacket stripping tool. properly sized for the pipe being installed, APT air test regulator, hooked carpe[ Before you begin to install any piping, you need to knife, tape measure, felt tipped marker, caulk gun and a mount the tank sumps to the top of the tanks. de-burring tool. The APT TS-4242 "Quick Set" tank sump consists of four sections, the base, the adjustable riser section, the access cover and the inspection lid. If you are using this sump, the riser section should be removed from the base e before installation by unscrewing it counterclockwise. Inspect the seal in the base for integrity. i We also have a full line of one piece tank sumps, includ- ing our TS Series TS-4736 and TS-4542. The model numbers designate base diameter and proper manhole • size respectively.These tank sumps are available in T$$- Tank Sump Shallow, TSM-Tank Sump Medium and APTjacket stripping tool. TSD-Tank Sump Deep models. There are several ways to mount the tank sump. The method will vary depending on whether the sump is to be mounted on a manway, or a standard 4" tank fitting r'— adapter. Mounting to a manway: If the sump is to be mounted on a manway,you may use a manway mounting adapter kit or compression ring. These will vary depending on the size and type of manway. With a manway, most installers mount APT sumps }`� directly to the manway. The sump is sealed to the man- +t "K"' .�t {4" `*•< - "-.,�, way with the manway gasket,and the manway lid sealed to the sump with urethane caulk (we recommend Bostik t *: ( 1100). You can order your tanks with a reverse flange manway, which makes mounting our sump a snap, while retaining the ability to remove the manway cover. APT test regulator kit qtr - To really get the job done quickly, cordless drills and a _ pneumatic impact wrench are recommended. y � ; 112 APT,standard j" tank rifting adapter.