Laserfiche WebLink
Mon'ig equipment to be installed <br /> Manufacturer: V � <br /> Model Number: T L.5, <br /> Sensor Type: —Vapor X Liquid_Both. <br /> Sensor/Panel specifications. <br /> Locatior(s)for sensors, <br /> Tank: int1.LA,'E{liiZi Piping:: <br /> Dispenser: :DCi,ry.� <br /> C. Monitoring and response plan submitted [Section 2632(d)(1)&(2)]. <br /> 15. Any special accessories,fittings,coatings,or linings not inherent within the initial design of the 10 tank or double-wall <br /> UST. [Section 2631 (b)] <br /> A. Approved by a nationally recognized independent testing organization. <br /> _ B. Demonstration of integrity with the primary and/or secondary containment. <br /> 16. Tanks subject to floatation. [Section 2635(a)(7)] <br /> A. Anchored by deadman or slab. <br /> _✓ B. Anchors to be installed as specified by manufacturer. <br /> C. Installation details provided on plans. <br /> D. Calculations provided. <br /> 17. SPILL AND OVERFILL PREVENTION <br /> V •Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br /> containers)/piping sump(s)required, including tank fill and all openings). <br /> A. Spill container[Section 2635(b)(1)]. <br /> If made of metal,exterior wall protected from galvanic corrosion. <br /> (/ Capacity: (minimum of five gallons) SE ! I <br /> C, I gYyl <br /> Equipped with a drain valve which allows drainage of spill into primary container. <br /> Manufacturer: <br /> B� Overfill prevention system does not allow for manual override and meets one of the following requirements: <br /> (1) Alert transfer operator at 90%full by restricting the flow into the tank or triggering an audible and <br /> visual alarm [Section 2635(b)(2)(A)] . <br /> Manufacturer: Model: <br /> (2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more than 95% <br /> capacity and activates an audible alarm at least five minutes before overfill[Section 2635(b)(2)(B)]. <br /> Manufacturer: Model: <br /> (3) Provide positive shut off at no more than 95%capacity[Section 2635(b)(2)(C)]. <br /> Manufacturer: Model: <br /> (4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not exposed to <br /> the product overfilling[Section 2635(b)(2)(D)]. <br /> 7 <br />