Laserfiche WebLink
Md*,,, 'ig equipment to be installed .r <br /> Manufacturer: <br /> Model Number: TL5, 1 <br /> Sensor Type: —Vapor_/� Liquid_Both. <br /> _ Sensor/Panel specifications. <br /> Locations)for sensors <br /> Tank: ic1U A44VPiping: S( '. <br /> Dispenser: CLXV0 <br /> C. Monitoring and response plan submitted[Section 2632(d) (1)&(2)]. <br /> 15. Any special accessories,fittings,coatings,or linings not Inherent within the initial design of the 1°tank or double-wall <br /> UST. [Section 2631 (b)] <br /> A. Approved by a nationally recognized independent testing organization. <br /> _ B. Demonstration of integrity with the primary and/or secondary containment. <br /> 16. Tanks subject to floatation. [Section 2635(a)(7)] <br /> A. Anchored by deadman or slab. <br /> ✓/ B. Anchors to be installed as specified by manufacturer. <br /> C. Installation details provided on plans. ' <br /> D. Calculations provided. <br /> 17. SPILL AND OVERFILL PREVENTION <br /> Underground storage tank equipped with spill container and an overfill prevention system. (detail drawing of spill <br /> container(s)/piping sump(s)required, including tank fill and all openings). <br /> A. Spill container[Section 2635(b)(1)]. <br /> _, / If�made of metal, exterior wall protected from galvanic corrosion. <br /> (/ Capacity: (minimum of five gallons) 0C II%4 Y1 <br /> Equipped with a drain valve whichallowsdrainage of spill into primary container. <br /> Manufacturer: qh t <br /> B. / Overfill prevention system does not allow for manual override and meets one of the following requirements: <br /> ✓_/ (1) Alert transfer operator at 90%full by restricting the flow into the tank or triggering an audible and <br /> visual alarm[Section 2635(b)(2)(A)]. <br /> Manufacturer: Model: ' <br /> _ (2) Restrict delivery flow to the tank 30 minutes before overfill when tank is filled at no more than 95% <br /> capacity and activates an audible alarm at least five minutes before overfill[Section 2635(b)(2)(B)]. <br /> Manufacturer: Model: <br /> (3) Provide positive shut off at no more than 95%capacity[Section 2635(b)(2)(C)]. <br /> Manufacturer: Model: <br /> (4) Provide positive shut-off of flow to the tank so that the fittings on top of the tank are not exposed to <br /> the product overfilling [Section 2635(b)(2)(D)]. <br />