Laserfiche WebLink
' ATTACHMENT A <br />FIELD AND LABORATORY PROCEDURES <br />1 <br />' Sampling Procedures <br />The sampling procedure for each well consists of measuring the water level and checking for <br />' the presence of separate -phase hydrocarbons (SPH), using either an electronic indicator and a <br />clear Teflon® bailer or an oil -water interface probe Wells not containing SPH are then <br />' purged of approximately three casing volumes of water (or to dryness) using a clean <br />centnfugal pump, gas displacement pump, or bailer The equipment and purging method <br />used for the current sampling event are noted on the attached field data sheets During <br />' purging, temperature, pH, and electrical conductivity are monitored in order to document that <br />these parameters are stable prior to collecting samples After purging, water levels are <br />allowed to partially recover Groundwater samples are collected using either a clean Teflon <br />' bailer or a dedicated submersible pump, placed into appropriate EPA -approved containers, <br />labeled, logged onto chain -of -custody documents, and transported on ice to a California <br />State -certified laboratory <br />Laboratory Procedures <br />' Groundwater samples were analyzed for total petroleum hydrocarbons as gasoline (TPHg), <br />benzene, toluene, ethyl -benzene, xylenes (BTEX compounds) and fuel oxygenates methyl - <br />tertiary -butyl -ether (MtBE), ethyl -tertiary -butyl -ether (EtBE), di -isopropyl ether (DIPE), <br />tertiary -amyl -methyl -ether (TAME), tertiary -butyl -alcohol (TBA), 1,2-dichloroethane (1,2 - <br />DCA), and ethylene dibromide (EDB), methanol, and ethanol by EPA Method 8260 The <br />' methods of analysis for the groundwater samples are documented in the laboratory analytical <br />report The laboratory analytical report and chain -of -custody documentation are presented as <br />Attachment B <br />Purge and Rinsate Water Disposal <br />Water generated during well sampling and equipment cleaning was pumped into a SECOR <br />truck mounted water tank The water was then transferred to the operating GWE system <br />where it was treated and then discharged under permit to the industrial wastewater stream <br />