Laserfiche WebLink
l u <br /> TREADWELL & ROLLO <br /> for the analyses requested The samples were labeled and placed into an ice-cooled <br /> chest for delivery to the analytical laboratory using chain-of-custody procedures <br /> 5.0 ANALYTTCAL TEST RESULTS <br /> The soil and groundwater samples from the monitoring well were analyzed for the <br /> following constituents. total petroleum hydrocarbons as diesel (EPA 8015 Modified) and <br /> benzene, toluene, xylenes, and ethylbenzene (EPA Test Method 8020) The certified <br /> laboratory reports containing the analytical results and the method reporting limits are <br /> presented in Appendix B <br /> The analytical results from our previous Hydropunch sampling and from the samples <br /> collected from MW-1 are summarized on Table 1 No diesel, benzene, toluene, <br /> ethylbenzene or xylenes (BTEX) were detected at or above the method reporting limit in <br /> the soil sample collected at the groundwater interface Diesel was detected m the <br /> groundwater sample collected from monitoring well MW-1 at a concentration of 0 1 <br /> milligrams per liter (mg/L) or parts per nullion (ppm), however, no BTEX constituents <br /> were detected at or above the method reporting limit. These results correlate with the <br /> results from the Hydropunch sampling where trace levels of diesel were detected in. HP-1 <br /> and HP-2 (Figure 2) at 0 2 and 0 4 ppm, respectively <br /> 6 <br /> • 11070707 PJC 18 November 1993 <br />