WORK PLANS - Laserfiche WebLink

Home Browse Search

APP Well Installation and Sampling at California National Guard Field Maintenance Shop Stockton, California The aforementioned spill procedures apply to spills occurring on land or within the confines of the construction area. Any spills that occur in the water are not anticipated, however, these would be reported to the appropriate regulatory authorities (i.e. U.S. Coast Guard, U.S. EPA, etc.). They will direct on site cleanup resources and efforts. In the event of an explosion, all non-essential personnel shall evacuate and help secure the site. It is essential that the site be evacuated and no one allowed re-entering, except to possibly save a life, until cleared by the Emergency Coordinator. The Emergency Response Team will determine what actions, if any, are appropriate. 9.2.3 Firefighting Plan (01.E.01, Section 19) Prevention - The primary goals of fire prevention and protection measures are: • To control ignition sources, and • Early detection and rapid response. The following guidelines will be followed at the site to achieve these goals: • Smoking will be prohibited on site except in designated areas approved by the SSHO. • No welding, open flame, or spark -producing operations will be allowed on site unless evaluated and approved by the SSHO. An OTIE Hot Work Permit issued by the SSHO will be required for all hot work. • Recognition - All fires and visible smoke will be reported at once to the SSHO. • • Response - In the event of fire or explosion, site evacuation procedures will be implemented and emergency response services will be notified. • OTIE personnel will only attempt to extinguish small incipient fires (e.g., fires that can be extinguished with available portable fire extinguishers). In the event of larger fires, OTIE will notify the proper authorities and evacuate the site in accordance with the Emergency Response and Contingency Plan. Only approved (by a nationally recognized testing laboratory) containers and portable tanks shall be used for the storage of flammable and combustible liquids. Metal containers and portable tanks (less than 660 gallons individual capacity) shall meet the requirements of Chapter I, Title 49 of the CFR (U.S. Department of Transportation (DOT) Hazardous Materials Regulations), Chapter 9 of the United Nations Rules for Transportation of Dangerous Goods, or National Fire Protection Association (NFPA) 386, Standard for Portable Shipping Tanks for Flammable and Combustible Liquids. Plastic fuel containers shall meet one or more of the following specifications: ANSI/American Society for Testing and Materials (ASTM) D3435, Plastic Containers (Jerry Cans) for Petroleum Products; ASTM F 852, Standard for Portable Gasoline Containers for Consumer Use; ASTM F 976, Standard for Portable Kerosene Containers for Commercial Use; ANSI/Underwriters Laboratories (UL) 1313, Nonmetallic Safety Cans for Petroleum Products. 9.2.4 (4) Posting of emergency telephone numbers (01.E.05) Emergency telephone numbers and reporting instructions for ambulance, physician, hospital, fire, and police shall be conspicuously posted at the work site. (Refer to Table 3) • OTIE 20