Laserfiche WebLink
Yes No Comment <br /> 90 Day Accumulation in Tanks (cont.) <br /> (Section 66262.34) <br /> If a double-walled tank, is the double-walled <br /> tank: [66265.193(e) (3)-) <br /> (A) Designed as an integral structure so that <br /> any release from the inner tank is contained <br /> by the outer shell? <br /> (B) If metal, protected from corrosion of the <br /> primary tank interior aux) the external surface <br /> of the outer shell? — <br /> (C) Provided with built-in, continuous lead <br /> detection system capable of detecting a release <br /> within 24 hrs or ASAP, unless otherwise <br /> approved by the Department? — <br /> Is all ancillary equipment provided with full <br /> secondary containment (e.g. , trench, jacketing, <br /> double-walled piping) except for the following? <br /> [66265.193(f)-) <br /> (1) Aboveground piping that is visually <br /> inspected daily. — <br /> (2) welded flanges, joints and <br /> connections that are visually <br /> inspected daily. _ — <br /> (3) Sealless or magnetic coupling pumps <br /> and sealless valves that are visually <br /> inspected daily. <br /> (4) Pressurized aboveground piping <br /> systems with automatic shut-off devices <br /> that are visually inspected daily. — <br /> Tank Repair, containment, or Closure: <br /> If the generator did not satisfy the requiremments <br /> of sub-sections 66265.196(f) (2-4) (see below) , <br /> was the tank closed in accordance with section <br /> 66265.197? (66265.196(f) (1) ) — <br /> If the cause of the release was a spill that did <br /> not damage the integrity of the system, was the <br /> waste removed and necessary repairs made before <br /> returning to service? (66265.196(f) (2) ) — <br /> If the cause of the release was a leak from the <br /> primary tank system into the secondary tank <br /> system, was the system repaired before returning <br /> to service? [66265.196(f) (3) ) — <br /> Revised 7/15/91 Page 16 <br />